Full Boar FBAD-038 handleiding

17 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 9 van 17
9
3/8 KEYED AIR DRILL SAFETY WARNINGS
Do not connect tool to pressure that potentially exceeds 150 psi (10.3 bar).
Only use clean, dry and regulated compressed air at 6.2 bar (90psi)
Only technically skilled operators should use the air tool.
Do not overreach. Only use in a safe working place. Keep proper footing and
balance at all times.
Keep bystanders away (when working in an area where there is a likelihood of
through traffic of people). Clearly mark off your operating area.
Only wear gloves that provide adequate feel and safe control of triggers and
any adjusting devices.
The tool must be disconnected from the air supply and rested on a flat
surface when not in use.
Always wear impact-resistant eye protection with side shields during
operation of the tool.
Appropriate hearing protection shall be worn.
The risks to others shall be assessed by the operator.
Ensure the tool is correctly lubricated during use. Only use the correct
lubricant as specified in this manual.
Slips, trips and falls are major causes of workplace injury. Be aware of slippery
surfaces caused by use of the tool and also of trip hazards caused by the
airline hose.
Proceed with additional care in unfamiliar surroundings. Hidden hazards may
exist, such as electricity or other utility lines.
This tool is not intended for use in potentially explosive atmospheres and is
not insulated from coming into contact with electric power.
Never use oxygen or combustible gases for operating pneumatic tools as this
could create a fire and explosion hazard.
Do not discard the manual and safety instructions.
Keep away from rotating end of tool. Do not wear jewellery or loose
clothing. Secure long hair. Scalping can occur if hair is not kept away from tool
and accessories. Choking can occur if neckwear is not kept away from tool.
Gloves can become entangled with rotating parts, causing severed or broken
fingers.
Rotating parts can easily entangle rubber-coated or metal-reinforced gloves.
Do not wear loose-fitting gloves or gloves with cut or frayed fingers.
Hold the tool correctly; be ready to counteract normal or sudden movements
and have both hands available.
Release the trigger in the case of an interruption to the air supply.

Bekijk gratis de handleiding van Full Boar FBAD-038, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkFull Boar
ModelFBAD-038
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2362 MB