Full Boar FBAD-038 handleiding
Handleiding
Je bekijkt pagina 8 van 17
8
3/8 KEYED AIR DRILL SAFETY WARNINGS
• Read and understand instruction manual before using.
• Always wear impact-resistant eye protection during the operation of the
air tool.
• Do not use this product if it is not completely assembled or if any parts
appear to be missing or damaged. Use of a product that is not properly and
completely assembled could result in serious personal injury.
• Do not carry tool with finger on the trigger.
• Disconnect the tool from the air supply before performing maintance,
leaving work area, moving tool to another location, making any adjustments,
during non-operation or handing tool to another person. Failure to do so
could result in serious personal injury.
• Clean and inspect the tool daily. Carefully check for proper operation of
trigger and safety mechanism.
• DO NOT use the tool unless the trigger is functional, or if the tool is
leaking air or needs any other repair.
• Be aware that the failure of the work piece, or accessories, or even of the
air tool itself, can generate high-velocity projectiles.
• Air under pressure can cause severe injury.
• Whipping hoses can cause severe injury. Always check for damaged or
loose hoses and fittings.
• DO NOT exceed the maximum pressure stated on the tool.
• Never carry an air tool by the hose.
• Quick connector couplings shall be used for connection to the compressed air
system and non-sealable air inlet connector must be fitted at the tool in such
a way that no compressed air remains in the tool after disconnection.
• Air tools shall only be connected to an air supply where the maximum
allowable pressure of the tool cannot be exceeded by more than 10%; in
the case of higher pressure ,a pressure reducing valve which includes a
downstream safety valve shall be built into the compressed air supply.
• Check prior to each operation that the safety and triggering mechanism is
functioning properly and that all nuts and bolts are tight.
• Do not carry out any alterations to the air tool.
• Avoid weakening or damaging the tool, for example by:
– punching or engraving;
– modification not authorized by the manufacturer;
– guiding against templates made of hard material such as steel;
– dropping or pushing across the floor;
– applying excessive force of any kind..
WARNING! Disconnect the tool from the air supply before inspecting the
air tool. Failure to do so could result in serious personal injury.
Bekijk gratis de handleiding van Full Boar FBAD-038, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Full Boar |
| Model | FBAD-038 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2362 MB |
