Frigidaire FMOS1746SS handleiding
Handleiding
Je bekijkt pagina 21 van 25
USE
TOP CABINET TEMPLATE
FOR PREPARATION OF TOP
CABINET
You n
eed to drill holes for the top support
screws, a hole large enough for the power
cord to fit through, and a cutout large
enough for the exhaust adaptor.
• Rea
d the instructions on the TOP
CABINET TEMPLATE.
• Tape it underneath the top cabinet.
• Drill the holes, following the instructions
on the TOP CABINET TEMPLATE.
CAUT
ION: Wear safety goggles when
drilling holes in the cabinet bottom.
I
nstallation Instructions
Blower Plate
Blower
Motor Screw
Remove the screw that holds the blower
plate to the microwave. Remove and save
the
screw holding the blower motor to the
microwave.
Back of
Microwave
2
End B
En
d A
Ca
refully pull out the blower unit. The
wires will extend far enough to allow
you to adjust the blower unit.
1
ADAPTING MICROWA
VE
BLOWER FOR OUTSIDE
TOP EXHAUST
3
Back of
Microwave
Back of
Microwave
Back of
Microwave
Rol
l the blower unit 90° so that fan blade
openings are facing out the top of the
microwave.
Before Rotation After Rotation
Back of
Microwave
Place t
he blower unit back into the opening.
AFTER: Fan Blade
Openings Facing
Top
CAUT
ION: Do not pull or stretch the
blower unit wiring. Make sure the wires
are not pinched, and that they are
properly secured.
4
Place the microwave in its up
right
position,
with the top of the unit
facing up.
C2.
C3.
EN-21
Bekijk gratis de handleiding van Frigidaire FMOS1746SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | FMOS1746SS |
| Categorie | Magnetron |
| Taal | Nederlands |
| Grootte | 4289 MB |
