Frigidaire FHPH142AA1 handleiding
Handleiding
Je bekijkt pagina 19 van 32
19OPERATING INSTRUCTIONS
Fan mode
Press the “ ” button until the Fan mode indicator lights up.
In this mode, you can select fan speed “Auto”, “Low”, “Med”, or “Hi”.
In this mode, the “ - ” or “ + ” button is disabled and the screen displays will be off.
Note: If PureAir
TM
filter(sold separately) is not installed, Auto fan speed will be disabled.
RH%
°C
°F
Heat
Fan
Dry
Cool
Auto
Dry mode
Press the “ ” button until the Dry mode indicator lights up.
In this mode, the “ - ” or “ + ” button is disabled and the screen displays will be off. The unit
will continuously drain moisture from the room.
Note: In this mode, the fan speed will be automatically set to "Low", which cannot be
changed.
In this mode, condensate drainage is required, refer to the "Drainage Instructions" for more
instructions to drain the excess condensate.
RH%
°C
°F
Heat
Fan
Dry
Cool
Auto
Heat Mode(For heat pump models only)
Press the “ ” button until the Heat mode indicator lights up.
Press the “ - ” or “ + ” button to choose the temperature you want.
Press the Fan button to choose the fan speed according to the illumination of the fan speed
indicator. You can choose the “Hi”, “Med”, “Low”, or “Auto” fan speed setting.
Note: In this mode, the air exhaust hose needs to be connected.
The unit has a built-in condensate pump to pump out the excess condensate during heating
mode. Condensate drainage is required, refer to the "Drainage Instructions" for more
instructions to drain the excess condensate.
RH%
°C
°F
Heat
Fan
Dry
Cool
Auto
Bekijk gratis de handleiding van Frigidaire FHPH142AA1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Frigidaire |
| Model | FHPH142AA1 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 3022 MB |
