Friedrich WallMaster WCVT12B30A Handleiding (90 Pagina's)

Handleiding

49 49

A

ROUTINE MAINTENANCE

Standard Filter Removal / Installation Instructions - Kuhl

1. Swing the door open, See Figure 404, and remove the lter by grasping the lter grip and pushing the lter holder upward and outward. See Figure

416.

2. Slide the lter grip out from the lter as shown in Figure 417.

NOTE: Make sure the front frame with the mesh lter is facing you.

3. Swing the front frame open. See Figure 418. Clean the front frame by washing the dirt from the lter. Use a mild soap solution if necessary. Allow

lter to dry.

4. Install the lter grip back into the lter by sliding it into the lter.

NOTE: The lter handle slides into the frame in only one direction. If the tab in the frame stops the handle from sliding in, slide the handle from the other

direction. DO NOT FORCE THE HANDLE INTO THE FRAME.

5. Install the lter back into the unit. Follow the instructions on the inside of the front door.

Figure 415

Figure 416

Figure 417

Figure 418

HANDLE

FILTER GRIP

FRONT

FRAME WITH

STANDARD

MESH FILTER

Bekijk gratis de handleiding van Friedrich WallMaster WCVT12B30A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.