Extron TLI Pro 201 handleiding
Handleiding
Je bekijkt pagina 44 van 48
TLI Pro 201 • Firmware Updates 36
Reset Network Settings
Purpose and Notes
Reset All IP Settings mode enables you to reset IP settings to factory defaults.
Activation
To reset all IP settings:
1. Hold down the reset button for about 6 seconds until the Power LED blinks twice (once at 3 seconds and
again at 6 seconds).
2. Release and press reset momentarily (for <1 second) within 1 second. Nothing happens if the momentary
press does not occur within 1 second.
Result
• Reset All IP Settings mode:
• Sets the DHCP back to factory default (Off)
• Sets the Hostname back to factory default (<Model name>-<last 3 octets of MAC>:
TLI-Pro-201-xx-xx-xx)
• Sets the IP address back to factory default (192.168.254.251)
• Sets the Subnet Mask address back to factory default (255.255.255.0)
• Sets the Gateway address back to the factory default (0.0.0.0)
• Sets the DNS Primary address back to the factory default (127.0.0.1)
• Sets the Domain name back to factory default (Blank)
Full Factory Reset
Purpose and Notes
Full Factory Reset mode is useful if you want to start over with configuration and uploading.
Activation
To reset the unit to all factory default settings:
Hold down the reset button for about 9 seconds until the Power LED blinks three times (once at 3 seconds, again
at 6 seconds, and again at 9 seconds).
Release and press reset momentarily (for <1 second) within 1 second. Nothing happens if the momentary press
does not occur within 1 second.
Bekijk gratis de handleiding van Extron TLI Pro 201, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | TLI Pro 201 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6183 MB |
