Extron MLC 55 RS MK handleiding
Handleiding
Je bekijkt pagina 18 van 56
J
Mute button (MLC 55 RS VC only) — By default, this button is in Toggle mode on
the MLC 55 RS VC to mute and unmute the volume on a connected Extron amplifier
with remote volume port capability. It is also configured to light red when active (see
the MLC 55, 62 and 64 Series Configuration Program help file for more information on
toggle switch mode and to program button lighting).
Buttons
The front panel button illumination provides status information about what the MLC is
doing. The buttons are lit brightly or dimly while the MLC has power. When a button has
been pressed and is active or on, it lights brightly. While a button is inactive or off, it is lit
dimly. In addition, using the MLC 55, 62 and 64 Configuration Program you can configure
any button to light red when it is active. When buttons are grouped together, only the
button that is pressed lights brightly. The other buttons in the group remain dim.
You can remove and replace the labels on these buttons, then use the configuration
program to add functions to them that their new labels represent.
The buttons can also be set up to perform a sequence of several functions, which can be
combinations of the following options:
• A driver operation — Execute an RS-232 or IR control command that is part of a
device driver (for a projector, VCR, DVD player, switcher, and so forth).
• Setting a time delay — Insert delays between executed commands.
• Setting the button lighting behavior — Specify fast or slow blinking of a front
panel button when it is pressed. You can also configure a button to light red.
• A user-defined RS-232 operation — Issue a non-driver-associated RS-232
command (one that you programmed separately), such as an SIS command, via the
IR/S or the RS-232 port.
• Button emulation — Initiate a series of button functions with a single button press.
NOTE: While the MLC is executing a configured command, all other front panel
buttons are disabled.
See the MLC 55, 62 and 64 Series Configuration Program help file for detailed procedures
for configuring the buttons. See Downloading and Installing the Configuration
Program on page 29 to obtain the program.
MLC 55 Series MediaLink Controllers • Installation and Operation 10
Bekijk gratis de handleiding van Extron MLC 55 RS MK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | MLC 55 RS MK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10355 MB |
