Extron IPL EXP S5 handleiding
Handleiding
Je bekijkt pagina 15 van 49
IPL EXP I/O Series • Hardware Features and Installation 7
• Each expansion interface and each control processor comes with a factory-installed Secure Sockets Layer
(SSL) security certificate. If you intend to install a different SSL certificate, contact your IT department to
obtain the certificate or for instructions on how to obtain one (see Secure Sockets Layer (SSL) Certificates
on page 37 for requirements and guidelines regarding SSL certificates).
• For systems that will use IEEE 802.1X security, obtain a PEM-encoded security certificate
and private key (see IEEE 802.1X Certificates on page 37) from your IT department.
Mount and Cable All Devices
• Mount the unit to a rack or furniture (see Mounting on page 10).
• Cable devices to the expansion interface (see Ports, Addressing, and Connections starting on page 14).
• Connect power cords and power on all the devices.
Set Up the Control Processor, Expansion Interfaces, Touchpanels, and Network Button
Panels for Network Communication
• Connect the PC that you use for setup, the LAN/PoE port, of the expansion interfaces, the LAN (or AV LAN)
port of the control processor, the LAN/PoE port of the expansion interfaces, and the touchpanels or network
button panels to the same Ethernet network. For expansion interface LAN connections, see LAN/PoE and
LAN/PoE+ (Ethernet) connectors and LEDs on page 18.
• Start Toolbelt and use it to set the IP address or addresses, subnet, gateway IP address, DHCP status, and
related settings (see the flowchart in Network Communication Setup on page 9).
NOTE: When setting up DHCP during network configuration or if using a host name instead of an IP
address, the user must enter a qualified host name (
Username.HostName.Domain
). For example:
somename.extron.com
.
Configure or Program the Control Processor, Expansion Interfaces, Touchpanels, and
Network Button Panels
• If TouchLink Pro touchpanels are part of the system, start and use GUI Designer to design, save, and
build the graphical user interface (GUI) layout for the touchpanels (see the GUI Designer Help File for
instructions).
NOTE: To redeem (activate) a LinkLicense, go to www.extron.com/llredeem and follow the online
instructions.
A LinkLicense unlocks features that add convenience, expand system options, and enhance the
capabilities of your Extron products. For IPCP Pro Q xi and xi systems, a LinkLicense allows you to
use a mobile device or computer as the primary control interface in an Extron control system where a
TouchLink Pro touchpanel may not be present.
• If using GC, create a new GC Professional or GC Plus project and configure the control processor,
expansion interfaces and other IP Link Pro devices.
The configuration tells each control processor and expansion interface:
• How its ports function • What to monitor
• How to control other products • When to do things
• Which touchpanels to interact with • Whom to notify, how, and under what circumstances
• Configure ports on the control processor:
• Select device drivers and link them to each serial, IR/serial, or Ethernet port.
• Select settings (serial protocol, relay behavior, digital I/O or flex I/O settings, AC output settings) as
needed.
• Add Network Button Panels (NBPs) and set them up. Assign button functions as desired.
• Add the IPL EXP expansion interfaces and configure their ports.
• Set up monitors, schedules, macros, and local variables.
Rev. B: Deleted steps
related to adding eBUS
devices to the project
and setting them up.
Bekijk gratis de handleiding van Extron IPL EXP S5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | IPL EXP S5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7534 MB |
