Extron IPL EXP S5 handleiding
Handleiding
Je bekijkt pagina 14 van 49
IPL EXP I/O Series • Hardware Features and Installation 6
Hardware Features and
Installation
This section covers the following material:
• Setup Checklist — A checklist of tasks to guide you through installation
• Network Communication Setup — A flowchart guide to network settings configuration
• Features — Locations and some descriptions of items on the front panel
• Mounting — Guidelines for mounting
• Ports, Addressing, and Connections — Locations, descriptions, and cabling notes for rear panel features
and corresponding front panel indications
• Resetting the Unit — Information about the available reset modes and how to reset the IPL EXP
Pay careful attention to the order and types of setup tasks. Follow the setup checklist in this guide or in the setup
guide and keep it with you for reference throughout the installation and conguration process.
Setup Checklist
Get Ready
• Familiarize yourself with the features of the IPL EXP Expansion interface (see Front Panel Features on
page 9 and Ports, Addressing, and Connections on page 14) and of any IPCP Pro xi Series control
processors, TouchLink Pro touchpanels, or button panels that are part of the system.
• Download and install the latest version of the following:
• Toolbelt software — for discovering the control processor, expansion interface, and other control
products on the network, for managing core settings, and for upgrading firmware when needed.
• Global Configurator (GC) software — for configuring the control system.
• Global Scripter or ControlScript programming software — for programming the control processor and
expansion interfaces (as an alternative to GC)
• GUI Designer software — for designing layouts for Extron TouchLink Pro touchpanels and third-party
touch interfaces
• IP Link Pro device drivers — for use with GC, to make control of other devices possible
All are avail able from www.extron.com (see Locating Software, Firmware, and Driver Files on the Extron
Website on page 31).
• Obtain network information for the unit from the network administrator. You also need the following details for
each Extron Pro series Ethernet-enabled device:
• DHCP setting (on or off) • Subnet mask
• Device (IPL EXP, IPCP Pro, TouchLink Pro, NBP)
LAN IP address
• Gateway IP address
• Username
• AV LAN IP address (for IPCP Pro Q xi models)
NOTE: If DHCP is on, you do not need the IP addresses and subnet mask.
• Passwords
• Write down the MAC address of each network interface on each IP Link Pro device to be used.
• Obtain model names and setup information for devices the system will control.
Rev. B: Added reference
to ControlScript
Programming Software.
Bekijk gratis de handleiding van Extron IPL EXP S5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | IPL EXP S5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7534 MB |
