Extron IPL EXP S5 handleiding
Handleiding
Je bekijkt pagina 16 van 49
IPL EXP I/O Series • Hardware Features and Installation 8
• Add touchpanels and set them up:
• Upload the GUI configuration to the Global Configurator project.
• Assign any appropriate functions, monitors, or schedules to the touchpanels and their buttons.
• If not using GC Professional or GC Plus, use Global Scripter or ControlScript programming software
to program the control system as desired.
• Program ports on the control processor:
• Program each serial, IR/serial, or Ethernet port as needed.
• Program relay behavior, digital I/O, flex I/O, and AC output settings as needed.
• Add Network Button Panels and set them up. Assign button functions as desired.
• Add the IPL EXP expansion interfaces and program their ports.
• Add touchpanels and set them up:
• Upload the GUI configuration to the project.
• Program functions, monitors, or schedules to the touchpanels and their buttons.
• Save the project.
• Build and upload the system configuration to the control processor, expansion interfaces, and other system
devices.
Test and Troubleshoot
• Test the system (see the Troubleshooting section starting on page 34 for an outline of items to check
during system troubleshooting).
• Make adjustments to wiring or configuration as needed.
Rev. B: Added
ControlScript
Programming Software.
Rev. B: Deleted steps
related to adding eBUS
devices to the project
and setting them up.
Bekijk gratis de handleiding van Extron IPL EXP S5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | IPL EXP S5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7534 MB |
