Extron FOXBOX Rx HDMI handleiding
Handleiding
Je bekijkt pagina 33 van 51
Command and Response Table for Receiver SIS Commands (continued)
FOXBOX Tx/Rx HDMI • Remote Control 25
Command Function
SIS Command
(Host to Unit)
Response
(Unit to Host)
Additional description
Memory presets
Save preset
X1(
, Spr
X1(]
Command code is a comma.
Recall preset
X1(
. Rpr
X1(]
Command code is a period.
Auto memory
Disable auto memory
55*0#
Img0
]
Enable auto memory
55*1#
Img1
]
Show auto memory status
55#
X1)]
Audio mute
Mute the audio
1Z
Amt1
]
Silence the audio output of the
receiver.
Unmute the audio
0Z
Amt0
]
The receiver outputs audio.
Show audio mute status
Z
X1)]
Audio mute status is
X1)
.
Test pattern
NOTE: You must have a video input connected to the transmitter and the transmitter-Tx-to-receiver-Rx fiber cable connected for the
receiver to output a selected test pattern. The test pattern turns off if the input signal rate changes or is disconnected or if power is
removed.
Output color bars
1J
Tst1
]
Set the receiver to output the color
bars test pattern.
Output grayscale
2J
Tst2
]
Set the receiver to output the
grayscale test pattern.
Output alternating pixels
3J
Tst3
]
Set the receiver to output the
alternating pixels test pattern.
Turn test pattern off
0J
Tst0
]
Set the receiver to output the input
video (no test pattern is selected).
Show test pattern status
J
X2)]
Disable and enable return link and daisy chain
NOTE: The disable return link function is primarily used and recommended when the transmitting device is a FOX 500 DA6 and the
receiver is connected to any of outputs 2 through 6 on the DA.
Disable return link
66*0*0#
Rle*0*0
]
Disable link 2.
Enable return link to transmitter
66*0*1#
Rle*0*1
]
Enable link 2 (default setting).
Enable daisy chain
66*0*2#
Rle*0*2
]
Enable receiver daisy chain mode.
Show return link and daisy chain
status
66*0#
0*
X2!]
Video bit depth
Set video bit depth to auto
E
V0BITD
}
BitdV0
]
Force video to 8-bit depth
E
V1BITD
}
BitdV1
]
View video bit depth
E
VBITD
} X2#]
HDCP notification
Enable notification
E
N1HDCP
}
HdcpN1
]
Disable notification
E
N0HDCP
}
HdcpN0
]
View notification status
E
NHDCP
} X1)]
KEY:
X1)
= Auto memory and HDCP status 0 = off 1 = on
X1(
= Memory preset number 01 to 30
X2)
= Test pattern 0 = none 2 = grayscale
1 = color bars 3 = alternating pixels
X2!
= Rx link and daisy chain enable 0 = disable 1 = return link enable 2 = daisy chain enable
X2#
= Video bit depth 0 = auto 1 = 8-bit
Bekijk gratis de handleiding van Extron FOXBOX Rx HDMI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Extron |
| Model | FOXBOX Rx HDMI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7241 MB |
