Exquisit KGC231-60-E-050CB handleiding
Handleiding
Je bekijkt pagina 46 van 118
Putting into operation
Clean the appliance and the interior parts thoroughly before putting into operation (see
chapter "Service and Maintenance").
• Set the temperature according to the ambient temperature at the installation
location if the equipment is changed or if the appliance door is opened and closed
frequently.
• With very high summer temperatures, set the temperature regulator to a higher
level to maintain the desired cooling temperature.
• For optimum energy consumption, leave the glass shelves/drawers in the
appliance as shown (see section 3.2 Proper storage of food).
• The freezer compartment is ready for use after about 3 hours.
Switch appliance ON/OFF
1. Connect the appliance to the mains power supply.
à When the appliance door is opened, the interior light comes on.
2. To switch on the appliance, turn the temperature regulator to the desired freezing
temperature. The temperature regulator is located at the top of the appliance
interior.
3. To switch off the appliance, pull out the mains plug.
ATTENTION
APPLIANCE DAMAGE!
Do not switch on the appliance immediately after a power interruption. Possible overload
of the compressor or fuse blows.
Setting the temperature
The temperature depends on certain
factors, such as the place of installation,
how often the appliance door is opened
and closed or how the appliance is
loaded.
1. Adjust the internal temperature of the appliance with the temperature control.
2. When switching on for the first time, turn the temperature regulator to the
highest setting.
à The appliance reaches its normal working temperature after approx. 2 hours and
is then ready for operation.
3. Turn the temperature regulator back to a medium setting.
Locating the coldest position in the refrigerating compartment
The adjacent symbol indicates a temperature of at least +4 °C and colder in the
refrigerator (above the glass shelf over the vegetable drawer).
If the "OK" symbol is not visible (temperature is not optimal):
Only change the temperature regulator gradually and wait for
approximately 12 hours before checking again).
Repeat this step until the "OK" symbol is visible.
Page 10
KGC231-60-E-050CB
Version 10/2023
Bekijk gratis de handleiding van Exquisit KGC231-60-E-050CB, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Exquisit |
| Model | KGC231-60-E-050CB |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16963 MB |
