Evolis signoSign/2 handleiding
Handleiding
Je bekijkt pagina 17 van 73
© signotec GmbH 2000-2024
signoSign/2 Documentation
Rev. B
Page 17 of 73
Individual connection types for the search can then be enabled or disabled here so as to
include or exclude them from the search. The search for serial devices and devices that are
connected via a USB Ethernet Adapter takes more time and is therefore not activated for
the search by default. All COM ports are searched in the case of serial devices. For IP
devices, it is possible to enter two IP addresses and the port under which to search for the
devices.
Click OK to apply your changes and then start a search with the new settings by clicking
Search devices.
A device included in the list can be selected by clicking it. You can now Identify signature
device, whereby a lamp is shown on the display of your signature pad. This is useful if
several signature pads of the same type are connected and you want to find out which
device is which. First of all, a signature device has to be defined as the primary device
using Assign first signature device. There is an option to define another signature pad as
the secondary signature pad using Assign second signature device. Alternatively, you
can assign the first signature pad as first signature device by double-clicking it or, if the
first device is already configured (assigned), assign it as second signature device. See the
following chapters for details on how to switch between devices during a signature
process and how to pre-select the signature device for signature fields.
If you assign a signature pad, you can enter a Description for the pad to make the
assignment more descriptive. This name is purely for administrative purposes and does
not affect the application or the function in any other way.
Depending on the selection, the defined devices appear on the list as the First or Second
signature device. The assignment can be deleted using the button with the cross. If the
first signature pad is deleted, the second signature pad automatically moves into the
place of the first. If two signature pads are defined, you can swap their positions by
clicking the button with the arrow.
The option Use second signature device as fallback defines whether a second
configured signature device should be used as a backup if the first configured signature
device is not available. If, for example, a Sigma is configured as first signature device (but
not connected) and the Tablet PC and Pen Display mode as second signature device, the
signature would be requested on the Tablet PC if this option is activated. If the option is
disabled, you would not be able to start the signing process as not both of the configured
signature devices are available. If no second signature device is defined, this setting has no
effect. This option is disabled by default.
If a signature pad has been defined as either the first or second signature device and is no
longer available because it is no longer connected to the computer for example, the
signature pad is displayed in red font colour. You should check that the device concerned
is connected properly or define another device as required.
Configuring the signature pad
If a signature pad has been defined as the first or second signature device, special settings
can be made for this device.
Click the cog icon to open these special settings in a new window.
Signature device settings
The signature device settings are available for the signature pads signotec Sigma, Sigma
Lite, Omega, Gamma, Delta and Zeta, but not for the signotec Alpha.
Bekijk gratis de handleiding van Evolis signoSign/2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Evolis |
| Model | signoSign/2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8452 MB |