Evolis signoSign/2 handleiding
Handleiding
Je bekijkt pagina 16 van 73
© signotec GmbH 2000-2024
signoSign/2 Documentation
Rev. B
Page 16 of 73
information. which can be configured specifically for this seal. For more information on
these settings, please refer to the chapter
just mentioned.
You can save the settings as usual by clicking OK or discard them by clicking Cancel.
Signature device settings
General settings
You can set the Location of the signature device configuration here. Either select the
Configuration file of signoSign/2, or create a Separate file or a Separate file (user-
specific). This setting may be necessary when using a terminal server system. The option
‘Separate file’ is selected by default.
Option
Storage location and file name
Configuration file of
signoSign/2
%ProgramData%\signotec\signoSign2\signoSign2_Configuration.
xml
Separate file (user-
specific)
%AppData%\signotec\signoSign2\signoSign2_PadConfiguration.x
ml
Separate file %ProgramData%\signotec\signoSign2\signoSign2_PadConfigurat
ion.xml
Use the Button design to set the layout of the button for the signature pad. The three
icons on the left (Cancel, Retry, OK) relate to the signotec Omega, Alpha, Gamma and
Delta display, while the three icons on the right relate to the signotec Sigma and Zeta. You
can choose between two different designs in two sizes. The last two designs (wide
buttons) are generally not supported by the Delta signature pad in interactive mode or by
the Alpha signature pad in general. If selected, the appropriate buttons in normal width
will be displayed instead for these signature pads. By default, the third option is selected.
In the signature device settings, you can select whether to Mirror the entire pad display
in the dialog box for signature capture. If you select this option, the pad display is also
shown in the signature dialogue box on the monitor screen. Otherwise, only the signature
that is provided will be mirrored. For the signotec Delta, you can also click buttons from
the PC and scroll the document in the pad. This option is disabled by default.
Use the setting Signature process timeout (in seconds) to define whether the signature
provided is automatically confirmed after X seconds. You can select values from 1 to 15. The
timer starts the first time you remove the pen from the display after signing. If you
continue to sign after the timeout, the timer will be reset and will start again when you
next remove the pen. This function can be used in both normal and interactive signing
mode and applies exclusively to signotec signature pads. This option has no effect on
reading mode or any configured confirmation text. This option is disabled by default.
Selecting signature devices
The field underneath contains a list of the Tablet PC and Pen Display and any installed
Plug-Ins by default, permanently. All connected signature pads are only listed in
accordance with the search criteria once the search has been completed successfully.
Signature device and Connection (USB, WinUSB, COM or IP) are displayed to provide
information on the signature pads.
To the right of the field listing the signature pads, you can search for signature pads. To do
so, click the Search devices button. A search for USB devices only is performed by default.
If the search is to include other devices, this can be defined using the Configure search
button. This configuration is permanently stored.
Bekijk gratis de handleiding van Evolis signoSign/2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Evolis |
| Model | signoSign/2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8452 MB |