Evolis signoSign/2 handleiding
Handleiding
Je bekijkt pagina 15 van 73
© signotec GmbH 2000-2024
signoSign/2 Documentation
Rev. B
Page 15 of 73
If the Display documents of matching size completely in the signature device (no
document hash) check box is enabled, documents with a size of 640 x 480 px, 800 x 480
px or 1280 x 800 px are shown fully on the signotec Omega, Gamma or Delta pad display
and signed. If the function is disabled, these documents are handled in the same way as
all other documents. This means that they are signed with DigSig if no form field with the
appropriate name is found. This option is disabled by default.
Insofar as a document hash is used, you can configure the display on the signature pad.
The basic structure, the document hash, the buttons and the line for the signature are
preset. However, there are four areas for which customised texts can be entered.
Placeholders can also be used for each area. The corresponding input fields, namely
Heading, Running text, Bottom left and Bottom right, can be found under Configure
display.
Stamp settings
Stamps
Here you can configure new stamps or edit or delete existing stamps. By default,
signoSign/2 is delivered with the three stamps Accepted, Declined and Confidential.
These are located in %PROGRAMDATA%\signotec\signoSign2\Stamps. After selecting
one of these stamps, the corresponding stamp is displayed under Preview. The following
buttons are available.
Add stamp
Edit stamp
Delete stamp
Change the order of the stamps in the selection display
Stamp settings
If you have decided to create a new stamp or edit an existing one, a new window opens in
which further settings can be made.
First, the name for the stamp must be configured. This is a mandatory field, as is the
image file itself, both of which must be filled. Using the button with the three dots, you
can select the corresponding image for the stamp via a file selection dialog. The image
formats .bmp, .jpg, .gif and .png are supported. Alternatively, you can edit the path
manually. Please note that the selected image file may not be moved afterwards,
otherwise the stamp can no longer be used.
With Width in cm and Height in cm you can adjust the size of the stamp as it is to be
inserted in the document. The aspect ratio remains the same so that when you change
the width the height is also automatically adjusted or the other way around. Under
Original size (pixel) you always see the size of the original image file, regardless of
whether you have adjusted the width and height for insertion.
The last option Insert as seal offers you the possibility to configure the stamp as a digital
seal. This way the stamp is not only inserted as an image, but as a seal, i.e. a digital
signature, which protects the document from manipulation (similar to a signature). Please
note that if you have not yet licensed the software, the demo mode watermark will also be
inserted.
By activating the seal, further configuration options appear. As with the signature settings,
a certificate is required for the seal. Here, the previously mentioned setting
Certificate for
Adobe DigSig signatures can be used via Use global certification settings. The mode
set there and, if applicable, the certificate configured there are used for applying the seal.
If this is not desired, the option should be deactivated. This activates the settings Mode,
Certificate file and Include only the end certificate in the X.509 certificate chain
Bekijk gratis de handleiding van Evolis signoSign/2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Evolis |
| Model | signoSign/2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8452 MB |