Evolis signoSign/2 handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273/ 73

Afdrukken

Je bekijkt pagina 14 van 73

© signotec GmbH 2000-2024

signoSign/2 Documentation

Rev. B

Page 14 of 73

Settings for the interactive signing mode

With the interactive signing mode, you can read through the document on the signature

pad using a signotec Delta. You can use the pen to scroll vertically through the document

and also insert hand-written marks and notes in the document. This is not possible in the

normal signing mode.

The following settings relate solely to the interactive signing mode when using the

signotec Delta signature pad.

The Line width of notes setting allows you to specify how thick or thin the line width of

inserted notes should be. This has no effect on the display of notes during their capture; it

concerns only their display after confirmation and insertion in the document. The option

‘Thin’ is selected by default.

With the Color of notes setting, you can define the colour in which notes are displayed

both during their capture and after confirmation and insertion in the document. You can

choose from various colours. The option ‘Blue’ is selected by default.

Line width of marks determines how thick or thin the line width of inserted marks should

be. The behaviour here is the same as for notes; the setting concerns the display of marks

only in the document and not during capture. The option ‘Normal’ is selected by default.

The last setting Color of marks defines the colour of the captured mark. This function can

be used as a text marker to highlight content. The option ‘Yellow’ is selected by default.

The note mode and the start mode can be started by clicking the corresponding button

on the pad, as long as the document has not yet been signed.

Use ‘signotec Content Signing’

As an alternative to Adobe-compliant digital signatures (DigSig), you can use ‘signotec

Content Signing’. This makes it possible to use the RSA functionalities of the signature pad

signotec Omega, Gamma or Delta. In this case, the pad is switched to a special mode

during signature capture in which the current screen content of the display is signed. The

possibility of external influences (manipulation) is ruled out. The hash of the document for

signing is shown on the display during signature capture. This hash is additionally entered

into a preconfigured form field of the PDF document. In this way, the signer can ensure

that he/she is signing the ‘right’ document. Alternatively, it is also possible to show a PDF

document of a matching size (640 x 480 px for the Omega, 800 x 480 px for the Gamma

or 1280 x 800 px for the Delta) fully on the display and sign it. For such documents, it is not

necessary to generate and compare a document hash. Instead of the actual signature, the

entire display of the signature pad is inserted in the document as an image on a new

page. This option is disabled by default.

In the Field for hash value of document field, please enter the name of the form field in

which the document hash is to be entered. Note that this form field must already be

contained in the document. If a field with this name is not found, a check is first made to

determine whether the document is of a matching size (if configured accordingly, see

below). If this is not the case, DigSig is used for signature insertion. The example below

illustrates the structure of the document hash:

/anJdc WC q8LO k9 eX Oel54o fuK4sG 38 EJpv zu Lh yKuDg=

The effect of the Print the document when the hash value changes setting is that the

document is printed whenever a new document hash is generated and entered into the

corresponding field. This is generally the case for the document’s first signature field. For

all other signature fields, it will depend on their configuration in the document type

administration. The document is printed before the signature capture, so this function is

useful for handing over a printed copy to the signer, for example. The hash printed on the

copy can then be immediately compared with the display on the signature pad. This

option is disabled by default.

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273/ 73

Bekijk gratis de handleiding van Evolis signoSign/2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd