Eventide BD600+ handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364/ 64

Afdrukken

Je bekijkt pagina 24 van 64

Operation as a Micro Precision Fixed Delay

Page 20 Chapter 1 Introduction BD600+Profanity Delay

Document Version 2.3

The bar graph below the four-digit display flashes to indicate precision delay configuration mode and

shows which of the four visible digits is selected for adjustment. The presence of the decimal point in-

dicates that the four digits shown are the ones, tenths, hundredths and thousandths digits. Use the

WAIT FOR SAFE and WAIT AND EXIT buttons to step through the selected digits. The following

illustration shows a 7.012345-second delay as the WAIT AND EXIT button is pressed six times. Press

WAIT FOR SAFE repeatedly to step back to the first digit. Press CONFIG again to get back to normal

precision delay mode.

Notes on Precision Delay mode

• The minimum delay setting the BD600+ will allow is 10 milliseconds. The absolute delay time

through the unit will depend on whether analog or digital inputs or outputs are being used.

• Broadcast profanity delay functions such as rebuild, dump or sneeze are only operative in pre-

cision delay mode at delay values of 100 milliseconds and above.

▪ The fixed delay writes data continuously into the 20-second buffer. Changes in delay value

changes the position of the play head, not the record head. That means that, if the delay length

is adjusted by ear, the user doesn't have to wait for new input audio to check the adjustment. As

an example, while listening to an audio source, try adjusting the seconds digit upward. It is easy

to play the same 1-second piece of input audio ten times.

▪ Small changes to delay values are smoothed, meaning that in most cases such changes can be

made on air. A large change will still be smoothed, but a soft click or a discontinuity in pro-

gram material may be apparent.

Editing the first digit

1’s of seconds

Editing the second digit

1/10 of seconds

Editing the third digit

1/100 of seconds

Editing the fourth digit

milliseconds

Editing the fifth digit

100’s microseconds

Editing the sixth digit

10’s microseconds

Editing the seventh digit

microseconds

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364/ 64

Bekijk gratis de handleiding van Eventide BD600+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd