Eurolite LED WF-100 handleiding
Handleiding
Je bekijkt pagina 24 van 28
00156502, Version 1.1
24/28
Stand-alone mode
Automatic mode
In automatic mode, 8 show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (Aut1–Aut8). Confirm with
the ENTER button.
2 SP, for running speed, is indicated in the display. Confirm with the ENTER button. Use the buttons UP
and DOWN to adjust the running speed of the program from SP01 (slow) to SP99 (fast). Confirm with the
ENTER button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the MENU button so many times until SoUn is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program (SoU1–SoU8). Confirm with
the ENTER button.
2 SE, for microphone sensitivity, is indicated in the display. Confirm with the ENTER button. Use the
buttons UP and DOWN to adjust the microphone sensitivity to the volume of the music (SE00 = low,
SE98= high).
Manual settings
In menu MAun various manual settings can be set.
1 Press the MENU button so many times until MAun in indicated in the display. Confirm with the ENTER
button.
2 The display indicates diMM for dimmer (000-255). Confirm with the ENTER button. After that follows
Stro for strobe (000-255), than Colo for color wheel (000-255), than rotA for water effect wheel 1 (000-
255) and rotb for water effect wheel 2 (000-255).
3 Confirm with the ENTER button.
Set
Fan
With this function, you can choose between silent and normal operation.
With the function dSiP, you can flip the display by 180° for a better view when the fixture is hung from the
truss or a ceiling. With diSP it´s back to normal.
LoSt
With the function, you can “hold” the DMX values or the device is switched dark “bLAc” if no DMX signal is
received.
rESt
With this function, you can restore the factory settings of the device. The different settings (marked in the
Menu structure) will be set back to the default values (shaded).
inFo
uEr
With this function, you can read out the software version.
tEMP
With this function, you can read out the inner temperature of the device.
Hour
With this function, you can read out the total operating hours of the device.
Bekijk gratis de handleiding van Eurolite LED WF-100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Eurolite |
| Model | LED WF-100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3078 MB |
