Eurolite LED KLS Laser Bar FX AIR handleiding

Verlichting

Eurolite

52 pagina's

PDF beschikbaar

Handleiding

00161181, Version 1.0

44/52

DMX OPERATION

The device works with a DMX controller via cable connection using the XLR connections and wirelessly

using a QuickDMX receiver via the USB port.

Connecting a DMX controller

A DMX512 data link is required for wired control of the device via DMX. The device provides 3-pin XLR

connectors for DMX connection.

1 Connect the output of your DMX controller to the DMX input DMX IN of the device with a DMX cable.

2 Connect the DMX output DMX OUT of the device to the DMX input of the next unit in the chain. Always

connect one output to the input of the next unit until all units are connected.

3 At the last unit, the DMX cable has to be terminated. Plug the terminator with a 120 Ω resistor between

Signal (–) and Signal (+) in the DMX output of the last unit.

4 If the cable length exceeds 300 m or the number of DMX devices is greater than 32, it is recommended

to insert a DMX level amplifier to ensure proper data transmission.

Wireless DMX transmission

The device features an alternative DMX input for a QuickDMX receiver (sold separately).

CRMX and WDMX receivers are compatible and can also be used. The connector allows a

DMX control signal to be transmitted wirelessly to the device, eliminating the need for

complex wiring to the DMX controller. The connector is designed as a USB port which

provides the required 5 V operating voltage for the receiver.

Bekijk gratis de handleiding van Eurolite LED KLS Laser Bar FX AIR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.