Eurolite LED KLS Laser Bar FX AIR handleiding

Verlichting

Eurolite

52 pagina's

PDF beschikbaar

Handleiding

00161181, Version 1.0

45/52

Setting the number of DMX channels and the DMX starting address

For operation with a controller with DMX512 protocol, the device is equipped with max. 27 control channels.

However, it can also be switched to a mode with 3, 8, 11 or 24 channels if different functions are required. To

be able to operate the device with a DMX controller, the DMX starting address must be set. The starting

address depends upon which DMX controller is being used. Please refer to the controller’s documentation.

1 Press the MENU button until DMX appears on the display. Confirm with the ENTER button. The display

then indicates dXXX. Confirm with ENTER.

2 The display will show 3 CH (3 DMX channels), 8 CH (8 DMX channels), 11 CH (11 DMX channels), 24

CH (24 DMX channels) or 27 CH (27 DMX channels). Use the buttons UP and DOWN to select the

desired DMX channel mode. Confirm with the ENTER button.

3 The menu for the DMX starting address is called up XXX. Use the buttons UP and DOWN to set the

address. Confirm with the ENTER button.

4 If DMX signals are being received, the display will stay lit. If no control signals are available, the display

will blink.

Note: Please make sure that you do not have any overlapping channels in order to control each device

correctly and independently from any other fixture on the DMX chain. If several devices are addressed to the

same address, they will work synchronously.

Functions in DMX mode

3-channel mode

Channel

Value

Function

000 – 255 Master Dimmer

Automatic Programs

000 – 005 No function

006 – 022

Program 1

023

‐

039

Program 2

040

‐

056

Program 3

057

‐

073

Program 4

074

‐

090

Program 5

091

‐

107

Program 6

108

‐

124

Program 7

125

‐

141

Program 8

142

‐

158

Program 9

159

‐

175

Program 10

176

‐

192

Program 11

193

‐

209

Program 12

210

‐

226

Program 13

227

‐

243

Program 14

244

‐

255

Program 15

Auto Program Speed/

Sound Control

000 – 125

Increasing speed of the SNAP automatic programs

126 – 250

Increasing speed of the FADE automatic programs

251 – 255

Sound control

Bekijk gratis de handleiding van Eurolite LED KLS Laser Bar FX AIR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.