Euro Appliances ECT600ACG handleiding
Handleiding
Je bekijkt pagina 16 van 21
16
In the child safety lock mode, except for pressing and holding the power button to
turn off, as well as press and hold the child lock button to unlock, the other buttons
are invalid.
Note : To prevent misoperation, press and hold the child lock button to lock the
control interface. If the child lock is not closed before closing the controller, the
child lock function will continue to be effective when the controller is opened again.
Unless the child lock is turned off, no buttons other than the power button and child
lock button can be operated.
9.Partition timing
The timer can be timed separately for any cooking zone, and the timing of each
cooking zone is independent of each other.
Single cooking zone timing
When setting a countdown time for a cooking zone, press timer button“ ” first,the
digital tube decimal point “ ”of the selected cooking zone will be on.The decimal
point of timer digital tube “ ”will display, and to indicate the set timer has been
related with the selected cooking zone. At this time, you can use the plus button
and minus button to set the countdown time.
Several cooking zones timing
Each timer setting operation will be same as “Single cooking zone timing”.
Press any cooking zone selection button, and the timer digital tube display the
timing value of that cooking zone.
When multiple burners are timed, you can switch the timing of different burners by
pressing the time button “ ”.
When not selecting any cooking zone, the digital tube will show the minimum timer
value of cooking zones, and the digital tube of corresponding cooking zone will
show “ ”.
10.Default timing
All the cooking zones have default timing function. The relationship of default
timing and power level refers to table below:
Power Level
1
2
3
4
5
6
7
8
9
Default timing(h)
6h
6h
5h
5h
4h
1.5h
When all the default timing is reached, the cooking zones will switch off
automatically and enter into standby mode.
11.High temperature warning
Press and hold power button “ ” manually for 3s till switch off, the whole
appliance will stop heating, but the cooking surface still has high temperature, the
indicator digital tube of corresponding cooking zone which stop heating will show
residual heat warning symbol “ ”, to indicate corresponding cooking surface high
temperature.
As long as the cooking zone has heated before, the high temperature warning
symbol “ ” will display for 35 minutes continually after the hob turn off.
12、Protection
High temperature protection: The electronic temperature sensor on the control
panel will transmit the real-time temperature to the chip of the control panel. The
control sensor starts protection when the electronic temperature sensor gauge the
Bekijk gratis de handleiding van Euro Appliances ECT600ACG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Euro Appliances |
| Model | ECT600ACG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4213 MB |
