Euro Appliances ECT600ACG handleiding
Handleiding
Je bekijkt pagina 15 van 21
15
At this time, the timing mode is entered, and the timing time of the selected burner can
be set; (The following operations are required in In timing mode)
If you want to cancel the timing, you can adjust the timing time to zero.
The first time you press the plus button“ ”, the timing starts from 1 minute, after
which you can press the plus or minus button to adjust the timing time.
Press the plus button“ ” for each time, the buzzer will beep once, and the heating
time will be increased by 1 minute. The timing will be continuously changed
between 1-99minutes . The maximum adjustment to 99 minutes;
Press the minus button “ ” for each time, the buzzer will beep once, and the
timing will be reduced by 1 minute. When the timing time is less than or equal to
30 minutes, the continuous adjustment timing will continuously change between
30-0 minutes; If the timing has been adjusted by the plus button “ ” for more than
30 minutes, press the minus button“ ” to adjust the timing to 0, and continue to
change the timing continuously between 30-0 by the minus button.
After the timer countdown is 0, the buzzer will continue to sound for 2 minutes, and
you can press any button to turn off the beep.
Note :
1. If the timing of a certain cooking zone has been set, to change the time, press the
time button again to select the corresponding cooking zone, and then enter the
new time by plus and minus buttons.
2. After the cooking zone is selected, the timing setting cannot be made before the
cooking zone power is set, and the time button is invalid.
3. When the timing of a certain cooking zone is set for the first time, if the cooking
zone selection button corresponding to the cooking zone is pressed when the
timing is not confirmed, the timing of the cooking zone is canceled.
4. When single or multiple cooking zones are working, the decimal point “ ”of the
corresponding cooking zone is always displayed during the timing setting process.
When multiple cooking zones are working, if two or more cooking zones have
been set the time, the timing digital tube displays the minimum timing of cook
zone.The decimal point of corresponding cooking zone is always on. The digital
tube decimal point “ ” is extinguished until the countdown time is over.
7.Power off
Under standby mode or heating mode, long press “ ” button for 3s, a short audible
signal will be heard,the appliance will go into power off mode. If the corresponding
cooking zone surface has residual heat at this time, the digital tube of power level
indicator will flash display “ ”,and indicate residual heat warning.
8.Child Safety lock button
The control panel can be locked by pressing and holding the child safety lock
button“ ” for 3 seconds whilst the appliance is under standby status or heating
status.The safety lock icon will display.When the appliance switch off the safety
lock icon will extinguish.
Under the child safety lock mode, the “ ” will display and flash(1s/time).If the
cooking zone has set the time,the digital tube will display the time and “ ”
alternately. If not, it will display “ ” and “ ”
Under the child safety lock mode, you can unlock it by pressing and holding the child
lock button “ ” for about 3 seconds.
Bekijk gratis de handleiding van Euro Appliances ECT600ACG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Euro Appliances |
| Model | ECT600ACG |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 4213 MB |
