Ermenrich Ping SM90 handleiding
Handleiding
Je bekijkt pagina 7 van 59
7
Stud detector function
Calibration must be done each time a new mode is selected.
Do not touch the sensing area of the device during measurement in order to avoid mistakes, because the human body has
conducting properties.
Display information
Display icons Detection result Display icons Mode
1
Non-ferrous metal 1 Stud detection
2
Ferrous metal 2 Metal detection
3
AC wire 3 AC wire detection
4
Wooden/metal stud
Metal detection mode
The metal detection mode is used for the detection of hidden objects made of ferrous and non-ferrous metals. Press the
SURVEY button (8) to switch to the stud detector function. The metal detection mode is set by default.
Calibration
1. Press the SURVEY button (8) to enter the menu. Select the Metal calibration (Metal detection calibration).
2. Place the device flat against the target surface. Make sure that there are no metal objects around.
3. Press the MEAS button (7) to start the calibration. The calibration will be carried out automatically. When the white part of
the display becomes dark, the calibration is completed.
4. Remove the device from the surface and press Power/Back button (4) to exit the calibration mode.
Usage
1. Complete the calibration and place the device flat against the surface to be tested. When a red line appears on the screen,
the device is ready to scan.
2. Slowly move the detector across the surface in the direction you want to scan.
3. When the device detects a metal object, the screen will display the icon (non-ferrous metal) or (ferrous metal), the
value of the distance to the target, and the signal strength indication. The device will emit a sound. The closer the device
is to the object, the stronger the signal will be.
4. When the signal is the strongest, the center mark (18) lights up. Move the device to locate the object according to the signal
intensity.
!
If you’re receiving erratic scanning results, it may be a result of humidity, moisture within the wall cavity or drywall,
or recently applied paint or wallpaper that isn’t fully dried.
Stud detection mode
The device can scan the surface for wooden and/or metal studs.
Calibration
Automatic calibration
1. Press the SURVEY button (8) to enter the menu. Press the Left/– button (3) or the Right/+ button (9) to select the stud
detection mode.
2. Place the device flat against the target surface.
3. The calibration will be carried out automatically. When the white part of the display becomes dark and yellow line
disappears, the calibration is completed.
4. Remove the device from the surface and press Power/Back button (4) to exit the calibration mode.
If the device does not search for wooden/metal objects after automatic calibration, you need to calibrate the device manually.
Manual calibration
1. Press the SURVEY button (8) to enter the menu. Press the Left/– button (3) or the Right/+ button (9) to select the stud
detection mode.
2. Press the MEAS button (7) to start calibration.
3. Place the device flat against the target surface.
4. When the display becomes dark, press the MEAS button (7) to force the device to calibrate.
5. Slowly move the detector across the surface in the direction you want to scan. When the signal is the strongest,
the center mark (18) lights up. When the white part of the display becomes dark and yellow line disappears, the calibration is
completed.
6. Remove the device from the surface and press Power/Back button (4) to exit the calibration mode.
Bekijk gratis de handleiding van Ermenrich Ping SM90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ermenrich |
| Model | Ping SM90 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6243 MB |
