Ermenrich Ping SM90 handleiding
Handleiding
Je bekijkt pagina 6 van 59
6
Volume measurement
Aim the laser at the target press the MEAS button (7) to measure the length, width, and height of the three-
dimensional target. The volume will be calculated automatically.
Calculations with 2 additional measurements (Pythagorean theorem)
Aim the laser at the target. Press the MEAS button (7) to measure the horizontal line length and hypotenuse
length. The vertical line length will be calculated automatically.
Calculations with 3 additional measurements (Pythagorean theorem), method 1
Aim the laser at the target. Press the MEAS button (7) to measure the horizontal line length and the lengths
of two hypotenuses. The line between the two hypotenuses will be displayed on the screen, and its length will
be calculated automatically.
Calculations with 3 additional measurements (Pythagorean theorem), method 2
Aim the laser at the target. Press the MEAS button (7) to measure the horizontal line length and the lengths
of two hypotenuses. The line between the two hypotenuses will be displayed on the screen.
Triangle area measurement
Aim the laser at the target. Press the MEAS button (7) to measure the lengths of the three lines. The area will
be calculated automatically.
Trapezoid side measurement
Aim the laser at the target. Press the MEAS button (7) to measure the lengths of two vertical lines and one
horizontal line. The fourth line length will be calculated automatically.
Horizontal line measurement
Aim the laser at the target. Press the MEAS button (7) to measure the hypotenuse length. The angle,
horizontal line length, and vertical line length will be calculated automatically.
Vertical line measurement
Aim the laser at the target. Press the MEAS button (7) to measure the lengths of the two lines. The device will
calculate the angle between these lines and the vertical line length between their ends.
Countdown
Use the Left/– button (3) or the Right/+ button (9) to adjust the countdown time. Press the MEAS button (7)
to measure the length. When the countdown time is over, a measured length value will be displayed on the
screen.
Digital level function
Press the DIST button (2). Press the Left/– button (3) or the Right/+ button (9) to scroll to the Digital level
mode. The inclination angle value will be displayed on the screen.
Bekijk gratis de handleiding van Ermenrich Ping SM90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Ermenrich |
| Model | Ping SM90 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6243 MB |
