Enttec EMU 70681 handleiding

Handleiding

12345678910111213/ 13

Afdrukken

Je bekijkt pagina 6 van 13

EMU HARDWARE (70681)

Visit the ENTTEC website for the latest version.

..



USER MANUAL

5 |

ID: 5956415

Document Updated: March 2025

DMX Connector

The EMU Hardware features both 3-Pin and a 5-Pin Female XLR DMX ports for a combined 512

channels of DMX512 output.

◼ PIN1: GND (V-)

◼ Pin 4: NC (5-Pin XLR only)

◼ Pin 2: Data –

◼ Pin 5: NC (5-Pin XLR only)

◼ Pin 3: Data +

Ethernet RJ45

The EMU Hardware features an EtherCON Ethernet RJ45 port with DHCP server. This allows users to

quickly create a lighting control network on the go, without the need for complex network setups.

Note: DO NOT connect EMU Hardware’s Ethernet RJ45 to other DMX ports or any established Ethernet

network. Doing so may cause DHCP conflicts or permanent damage to the EMU Hardware along with

the connected equipment. Always verify connections before proceeding with installation.

Footswitch and MIDI

The EMU Hardware features a standard ¼" stereo jack, compatible with any MIDI device or non-

latching footswitch.

Footswitch: Both normally-open and normally-closed switches are supported. Only passive pedals

that short the tip & sleeve (Switch A) or ring & sleeve (Switch B) should be used. A mono ¼" jack for

single-switch connections is also supported.

Proprietary pedals with non-standard jacks or additional signals should be avoided.

MIDI: EMU Hardware automatically detects whether a Type A or Type B wired MIDI connection is used

and works seamlessly with both.

¼" TRS Jack

Footswitch

MIDI – Type A

MIDI – Type B

Sleeve

GND

Shield

Shield

Ring

Switch B

Source

Sink

Tip

Switch A

Sink

Source

LED Status Indicator

The EMU Hardware LED status display various statuses by default:

LED Colour

Status

Blue

Starting-up

White

Idle

Green

Data received

Red and White

Error/Powered without USB data

Red

Error/Boot

Cyan

MIDI Input

Yellow

Footswitch Input

Additionally, the LED indicator is customizable, allowing you to select your preferred colour for the

status display. However, the red error status feedback will always remain visible regardless of your

chosen settings.

12345678910111213/ 13

Bekijk gratis de handleiding van Enttec EMU 70681, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd