Ensemble Designs BrightEye 16 handleiding

Niet gecategoriseerd

Ensemble Designs

24 pagina's

PDF beschikbaar

Handleiding

BrightEye 16 D-to-A Converter TBC/FS and Disembedder

BrightEye-4

REAR CONNECTORS

All connections to the BrightEye 16 converter are made on the rear of the unit.

Refer to the illustration below.

Power Connection

Connect a modular power supply to the 12 volt DC power input connection on the

far left of the unit. Use the locking ring to secure it.

USB Connector

The USB connector is used to provide more comprehensive control, diagnostics,

and upgrades to the unit from a PC or Mac. Use the BrightEye Control applica-

tion included on CD-ROM to make adjustments as described in the OPERATION

section of this user guide.

Input/Output BNCS

There are four rear BNC connectors used as inputs and outputs as follows:

SDI In

This BNC input accepts a SMPTE 259M serial digital component signal, 525 or

625 line standard.

Ref In

For synchronizing (genlocking) the input signal to an external reference, connect

a composite video (PAL or NTSC) to the Ref In BNC.

Composite Out 1 and 2

Two timed composite outputs are provided for feeding analog destinations. The

standard PAL or NTSC outputs follow the input standard and must be the same

standard as the reference, if one is used.

Analog Audio Out

A 15 pin D connector provides the output for four channels of analog audio

according to the pinouts given in the table and shown in the illustration below.

BrightEye 16 Rear Connectors

Analog Audio Pinouts

Signal Pins Output

Aud 1 +, –, G 1, 2, 7 Output 1

Aud 2 +, –, G 5, 4, 3 Output 2

Aud 3 +, –, G 11, 12, 6 Output 3

Aud 4 +, –, G 15, 14, 13 Output 4

AUD 2 AUD 1

AUD 3

AUD 4

Bekijk gratis de handleiding van Ensemble Designs BrightEye 16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.