Elsner Remo KNX RF handleiding
Handleiding
Je bekijkt pagina 30 van 38
28 Channel setting in the ETS
Remote Control Remo KNX RF • Version: 14.09.2021 • Technical changes and errors excepted.
6.5.1. Control modes for drive control
If channels are used as switches to operate shades or windows, then various control modes
can be set. Standard, Standard inverted and Comfort.
Standard:
Short tap to move the drive step-wise and to stop it. Hold it longer to move the drive to the
end position. The time difference between ‘short’ and ‘long’ can be adjusted.
Standard inverted:
Short tap to move the drive to the end position. Hold it longer to move the drive step-wise
and to stop it. The time difference between ‘short’ and ‘long’, as well as the repeat interval
can be customised.
Comfort mode:
In comfort mode, short tapping, holding the button slightly longer and holding it for a long
time trigger different reactions from the drive. The time intervals are configured individual-
ly.
Short tap (shorter than Time 1): The drive is positioned step-wise and stopped.
Holding it slightly longer (longer than Time 1, but shorter than Time 1+2): Drive running.
Drive stops when the button is released.
Long holding (release after Time 1+2 runs out): Drive moves independently to the end po-
sition. The movement can be interrupted by a short tap.
Control mode Standard
Behaviour when a button is operated:
short = stop/step; extended = up or down
Time between short and long
in 0.1 seconds
1...50; 10
Control mode Standard inverted
Behaviour when a button is operated:
short = up or down, long = stop/step
Time between short and long
in 0.1 seconds
1...50; 10
Repetition of the step command
on long button actuation
every 0.1 s... • every 2 s; every 0.5 s
Time point 0: Touching the button, beginning of Time 1
Release before Time 1 runs out: Step (or stop if the drive is moving)
Time 1 Time 2
01 1 + 2
Fig. 1
Comfort mode time interval scheme
Bekijk gratis de handleiding van Elsner Remo KNX RF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Remo KNX RF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3349 MB |
