Elsner Remo KNX RF handleiding
Handleiding
Je bekijkt pagina 28 van 38
26 Channel setting in the ETS
Remote Control Remo KNX RF • Version: 14.09.2021 • Technical changes and errors excepted.
Input type – Window:
If the channel should be used to control a window, select the ‘Input’ type and the ‘Window’
function and set whether, after completing a movement command, feedback for the move-
ment position should be sent to the remote control.
Choose whether buttons should be used for operation. If you deactivate buttons, you
must activate the slide bar below to enable operation!
Set the control mode for the buttons and apply the corresponding settings. A description
of the setting options for the individual control modes can be found in chapter 6.5.1. Control
modes for drive control, Seite 28.
Activate the function if the window is to be adjusted via the slide bar. If the slide bar AND
buttons are activated, the small area next to the bar can be used to switch between the op-
erating functions. If none of the operating functions are active, the channel is not functional.
Input type – Temperature:
If the channel is to be used to adjust the target temperature in the room, select the ‘Input’
type and the ‘Temperature’ function. Activate the temperature feedback to receive up-to-
date information from the bus.
Set the minimum and maximum adjustable temperature value as well as the increment val-
ue for temperature adjustment.
Choose whether buttons should be used for temperature adjustment. If you deactivate
buttons, you must activate the slide bar below to enable operation!
Type Input
Function Window
Use feedback No • Yes
Use buttons No • Yes
Control mode • Standard
• Standard inverted
• Comfort mode
Use movement position slide bar No • Yes
Type Input
Funktion Temperature
Use feedback No • Yes
Minimum adjustable value in increments of
0.1 °C
-32768...32767; 160
Maximum adjustable value in increments
of 0.1 °C
-32768...32767; 260
Increment (in 0.1 °C) 0...100; 5
Use buttons No • Yes
Bekijk gratis de handleiding van Elsner Remo KNX RF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Remo KNX RF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3349 MB |
