Elsner Remo KNX RF handleiding
Handleiding
Je bekijkt pagina 17 van 38
15 Care and maintenance
Remote Control Remo KNX RF • Version: 14.09.2021 • Technical changes and errors excepted.
4. Care and maintenance
Please carefully clean the remote control with a damp cloth. Do not use detergent.
4.1. Troubleshooting
Problem: The display is off, the remote control does not react:
Problem: The display is on, the device/drive does not react to button presses:
Problem: Menu cannot be accessed (the menu does not appear if the upper bar is swiped
from the top downwards):
5. Disposal
After use, the device must be disposed of in accordance with the legal regulations. Do not
dispose of it with the household waste!
Cause Procedure
Transport block active Please connect the remote control to the power supply using
a charging cable. This deactivates the lock.
Battery not charged Please connect the remote control to the power supply using
a charging cable to charge the battery. The charge status is
shown with the battery symbol at the top right corner of the
operation pages.
Cause Procedure
Wireless contact has been lost,
transmitter is too far away from
the receiver
Choose another location
No voltage to receiver unit or
faulty receiver unit
Switch on the receiver unit (e.g. the control unit). Should
wireless contact still not be established, please contact
Customer Service
Cause Procedure
Menu locked Unlock the menu in the ETS application or via the correspon-
ding communication object
Bekijk gratis de handleiding van Elsner Remo KNX RF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Remo KNX RF |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3349 MB |
