Elsner KNX WS1000 Style handleiding
Handleiding
Je bekijkt pagina 40 van 140
38 Automatic settings
Control System KNX WS1000 Style • Version: 28.05.2018 • Technical changes and errors excepted.
Disable: If the blind respectively the roller shutter should not react to the wind, select
Never retract (default setting.
Confirm your setting with the OK button.
A wind alarm triggered for the drive will remain active for 5 minutes. Additionally, a
wind delay can be set for shades. Then the automatic functions remain switched off for
the defined period of time after the end of the wind alarm. Manual operation is howev-
er possible again.
System > Automatic Settings > General Settings > Wind Delay
3.3. Setting a wind delay (shades)
Press the button to enable or disable the rain alarm. The rain alarm protects against
moisture damage by retracting the blind respectively the roller shutter.
Enable:
If the shading should be retracted when there is rain, select Yes.
Disable:
If the shading respectively the roller shutter should remain closed when there
is rain, select No. (default setting).
Confirm your setting with the OK button.
Press the button to enable or disable the switchover to automatic mode at a set point
in time, or following a manual intervention.
The general Automatic Reset occurs daily at the same time.
Switching on:
To set the blind respectively the roller shutter to Automatic at a set point
in time, select Yes (this is the default setting).
Switching off:
To switch off the blind’s/shutter’s Reset function, select No.
Alternatively, the automatic function can be reactivated at a set time following a man-
ual intervention.
Switching on:
To perform an Automatic Reset after a manual intervention, select Yes.
Switching off:
To switch off the blinds’s/ shutter’s Reset function, select No (this is the
default setting).
Confirm your setting with the OK button.
Automatic Reset time and/or period can be set.
System > Automatic Settings > General Settings > Automatic Reset
3.3. Define automatic reset
Rain Alarm
Automatic Reset
Bekijk gratis de handleiding van Elsner KNX WS1000 Style, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX WS1000 Style |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12479 MB |
