Elsner KNX T-UP Touch handleiding
Handleiding
Je bekijkt pagina 42 van 46
40 Parameter setting
Sensor KNX T-UP Touch • Version: 05.09.2022 • Technical changes and errors excepted.
Awning
Standard:
Standard inverted:
Comfort mode:
Dead man‘s switch:
Window
Pushbutton function • On
• Off
• On/Off
Control mode • Standard
• Standard inverted
• Comfort mode
• Dead man‘s switch
Behaviour in case of button actuation (retract): short = Stop | long = Retract
Behaviour in case of button actuation (extend): short = Stop | long = Extend
Behaviour in case of button actuation (retract/extend): short = Stop | long = Retract/Extend
Time between short and long
in 0.1 seconds
0 ... 50; 10
Behaviour in case of button actuation (retract): long = Stop | short = Retract
Behaviour in case of button actuation (extend): long = Stop | short = Extend
Behaviour in case of button actuation (retract/extend): long = Stop | short = Retract/Extend
Time between short and long
in 0.1 seconds
0 ... 50; 10
Repeat the step command
for a long button press (only Up)
no • every 0,1 s • ... • every 0,5 s • ... • every
2 s
Button is pushed and
released before time 1 expired
held longer than time 1
released between time 1 and 1-2
released after time 1 +2
Stop
On | Off | On/Off
Stop
no more stop
Time 1 (in 0,1 s) 0 ... 50; 4
Time 2 (in 0,1 s) 0 ... 50; 20
Push button On- | Off- | On/Off command
Release button Stop command
Pushbutton function • Close
• Open
• Open/Close
Control mode • Standard
• Standard inverted
• Comfort mode
• Dead man‘s switch
Bekijk gratis de handleiding van Elsner KNX T-UP Touch, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX T-UP Touch |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4147 MB |
