Elsner KNX T-UP Touch handleiding
Handleiding
Je bekijkt pagina 43 van 46
41 Parameter setting
Sensor KNX T-UP Touch • Version: 05.09.2022 • Technical changes and errors excepted.
Standard:
Standard inverted:
Comfort mode:
Dead man‘s switch:
Dimmer
8 bit encoder:
Behaviour in case of button actuation (close): short = Stop | long = Close
Behaviour for button actuation (up): short = Stop | long = Up
Behaviour in case of button actuation (open/close): short = Stop | long = Open/Close
Time between short and long
in 0.1 seconds
0 ... 50; 10
Behaviour in case of button actuation (close): long = Stop | short = Close
Behaviour for button actuation (up): long = Stop | short = Up
Behaviour in case of button actuation (open/close) long = Stop | short = Open/Close
Time between short and long
in 0.1 seconds
0 ... 50; 10
Repeat the step command
for a long button press (only Up)
no • every 0,1 s • ... • every 0,5 s • ... • every
2 s
Button is pushed and
released before time 1 expired
held longer than time 1
released between time 1 and 1-2
released after time 1 +2
stop/step
Up or Down
Stop
no more stop
Time 1 (in 0,1 s) 0 ... 50; 4
Time 2 (in 0,1 s) 0 ... 50; 20
Push button Close- | Up- | Open/Close command
Release button Stop command
Pushbutton function • Brighter • darker • Brighter/darker
Time between switching and dimming
in 0.1 seconds
0 ... 50; 5
Repetition of the dimming command No • Yes
Repetition of the dimming command
upon extended button actuation
every 0,1 s • ... • every 0,5 s • ... • every 2 s
Dimming by 100% • ... • 6% • ... • 1,5%
Value range • 0 ... 255
• 0% ... 100%
• 0° ... 360°
Value • 0... 255
• 0 ... 100
• 0°... 360°
Bekijk gratis de handleiding van Elsner KNX T-UP Touch, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | KNX T-UP Touch |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4147 MB |
