Elsner Corlo Touch KNX handleiding
Handleiding
Je bekijkt pagina 22 van 148
20 Description
Display Corlo Touch KNX • Status: 30.08.2021 • Technical changes and errors reserved.
• Movement position and slat position can be set in two degrees. Slat retraction
dependent on sun elevation possible
• Travel delays during extension/retraction can be set
• Night-time closure
• Timed closure
• Interior temperature block: Leave open until a selected interior temperature is
reached
• Outdoor temperature block: Shading active only once a pre-set outdoor
temperature is exceeded
• Heat protection (alternative movement position)
• Frost protection (retraction when precipitation below a pre-set outdoor
temperature)
• Wind protection (retraction when a pre-set wind speed is exceeded)
• Rain protection (retraction during precipitation)
• Automatic resets (time/periods can be set)
Window
In order to control the windows, the ambient parameters/measuring values
• Outdoor temperature
• Indoor temperature
• Indoor air humidity
• CO2 content of indoor air
•Wind speed
• Precipitation warning
•Time
are needed.
• Graded opening with up to 10 levels
• Movement position/opening limitation
• Ventilation based on indoor temperature, air humidity and room air CO2
content
• Outdoor temperature block: Block when below a selected outdoor temperature
• Frost protection: Retraction when precipitation below a pre-set outdoor
temperature
• Close when the supply air temperature is higher than the room temperature
• Rain protection: Close completely or to only provide a gap during rainfall
• Wind protection: Close when a pre-set wind speed is exceeded
• Timed ventilation, timed closure
• Night-time re-cooling (period, room temperature and window opening can be
set)
• Automatic resets (time/periods can be set)
Ventilation device
In order to control ventilation devices, the ambient parameters/measuring values
• Outdoor temperature
• Indoor temperature
• Indoor air humidity
• CO2 content of indoor air
Bekijk gratis de handleiding van Elsner Corlo Touch KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Corlo Touch KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16939 MB |
