Elsner Corlo Touch KNX 5in WL Handleiding (144 Pagina's)

Handleiding

17 Description

Display Corlo Touch KNX 5in • Status: 30.08.2021 • Technical changes and errors reserved.

1.6. Disposal

After use, the device must be disposed of or recycled in accordance with the legal re-

gulations. Do not dispose of it with the household waste!

1.7. Use of the proximity sensor

With the integrated proximity sensor, the screen saver can be deactivated already

when a hand aproaches (fast activation from stand-by) or functions can be triggered

via the bus (switching on approach).

To use the proximity sensor for sending communication objects, for example for swit-

ching, set the proximity sensor parameters in the ETS accordingly. See manual chapter

 2.7. Proximity sensor

1.8. Load individual images

1.8.1. Images for screensaver

The setting of the screen saver is described in the manual chapters

 2.4. Display (ETS) and 3.4.4. Screen saver (Display)

Images that are shown as the screensaver must be stored on a micro SD card. In order

that the system can recognize the SD card, carry out a reset in the menu after inserting

it

Settings> System > Reset

This is not necessary if the card was inserted before booting the system. The card must

remain in the device.

The proximity sensor reacts only when a larger object moves

from the front into the detection area. It is best to move the flat

hand towards the display so that the sensor reacts quickly.

Abb. 10 Proximity sensor

1 Proximity sensor Sender

2 Proximity sensor Receiver (and light sensor for adaption

of the screen brightness)

2 1

Bekijk gratis de handleiding van Elsner Corlo Touch KNX 5in WL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.