Elsner Cala Touch KNX TH handleiding
Handleiding
Je bekijkt pagina 58 van 118
56 Setting the parameters and functions for all
Room Controller Cala Touch KNX • Version: 13.07.2022 • Technical changes and errors excepted.
Select the menu page to be displayed as the start page.
Display
The possible settings on the device display are explained in the chapter Device control
on the touch display > Device settings, page 11.
6.4. Button tone
The Room Controller Cala Touch KNX may output an acoustic signal as feedback
if a key on the screen is activated. The button tone may be switched on or off via an
object, in the ETS menu or on the display.
Object control
Settings via an object, i.e. via the bus, is executed with object 31 (1 = On, 0 = Off).
Activate the object controls as desired.
ETS
Set whether and/or when the ETS settings for the button tone are to remain active. Do
not use the setting "after voltage return and programming" for first commissioning.
Switch the tone on or off.
Menu start page • Settings
• Sensor system
• Temperature controller
• Light 1
• Light 2
• Light 3
• Drive 1
• Drive 2
• Drive 3
• Scenes
• Universal functions
• RGB control
• Color temperature
• HCL control
• Timer switch
• Info page 1
• Info page 2
Use button tone object No • Yes
The following parameters
should be maintained
• never be retained
• after power restoration
• after power restoration and
programming
Use button tone No • Yes
Bekijk gratis de handleiding van Elsner Cala Touch KNX TH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Cala Touch KNX TH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11667 MB |
