Elsner Cala Touch KNX TH handleiding
Handleiding
Je bekijkt pagina 32 van 118
30 Operating the device via the touch display
Room Controller Cala Touch KNX • Version: 13.07.2022 • Technical changes and errors excepted.
Cancel and return to the previous menu level without saving.
(6) The dots on the lower display edge symbolise the individual menu pages in the
main menus. The currently selected position is marked in colour. Swipe to the left or
right on the display to show the other menu pages.
4.12. Weekly timer
Use the ‘Timer’ operating page to modify up to 8 timer intervals. The KNX system func-
tions that are to be switched by the weekly timer must be set in the ETS.
Setting the weekly timer on the device is only possible if the ‘Settings’ have been acti-
vated in the ‘Menus’ ETS setting item. Only the switching periods that are activated
there are displayed. If necessary, the switching command can be blocked via the bus.
Menus, page 57 and Timer, page 65
(1) Name
(2) To settings. Tap here to accept the changes.
(3) The information text shows if the current time is within one or multiple timer peri-
ods. If there is no time received via the bus, the ‘No time available’ message is dis-
played.
(4) The dots on the lower display edge symbolise the individual menu pages in the
main menus. The currently selected position is marked in colour. Swipe to the left or
right on the display to show the other menu pages.
Tap on the gear icon to accept the changes.
1
Fig. 26: Timer menu
4
2
3
Bekijk gratis de handleiding van Elsner Cala Touch KNX TH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Cala Touch KNX TH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11667 MB |
