Elsner Cala Touch KNX TH handleiding
Handleiding
Je bekijkt pagina 31 van 118
29 Operating the device via the touch display
Room Controller Cala Touch KNX • Version: 13.07.2022 • Technical changes and errors excepted.
A brief tap on the sequence button will take you to the configuration of the sequence.
Fig. 22: Sequence selection
The numbers of all sequences released for
use are displayed in white, locked sequenc-
es in gray. To release or lock a sequence,
stay on the sequence button longer, until
the color changes. When the keypad tone is
activated, an acoustic feedback occurs.
Fig. 23: Sequence X setting
The start and stop times and the values of
brightness and color temperature at the end
of the sequence are displayed.
Touch the area with the times to change
them.
Touch the area with the values to adjust
them.
Fig. 24: Sequence X start/stop
Touch the individual areas for hour, minute,
and second, the start and stop times to
change them.
The selected field is then outlined in blue
and the value can be changed with +/-.
With OK you confirm all values and leave
the time setting.
Fig. 25: Sequence X brightness/temperature
Touch the areas for brightness value and co-
lor temperature value to change them.
The selected field is then outlined in blue
and the value can be changed with +/-.
With OK you confirm all values and leave
the setting.
Bekijk gratis de handleiding van Elsner Cala Touch KNX TH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Cala Touch KNX TH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11667 MB |
