Elsner Cala Touch KNX TH handleiding
Handleiding
Je bekijkt pagina 26 van 118
24 Operating the device via the touch display
Room Controller Cala Touch KNX • Version: 13.07.2022 • Technical changes and errors excepted.
Scene control on the device is only possible if the individual "Scenes" have been acti-
vated in the ETS setting item "Menus".
Menus, page 57 and Scenes, page 61
The "Scenes" display page is divided into four areas for calling and storing four scenes.
The menu page shows the
(1) name entered in the ETS.
(2) Each scene area is also named individually.
The basic setup of the scenes, such as the assignment of the functions, takes place in
the ETS
Scenes, page 61
A scene is called up by briefly tapping in the scene area. If storage has been activated
in the ETS, the current settings of the assigned functions can be transferred to the
scene memory by touching the area for a longer time. When called, the new settings
will be executed from now on.
The current status of a scene can be displayed (if activated in the ETS):
(3) The dots on the lower display edge symbolise the individual menu pages in the
main menus. The currently selected position is marked in colour. Swipe to the left or
right on the display to show the other menu pages.
4.8. Universal display
On the "Unversal display" display page, values can be displayed in up to four areas.
Name
(text) Scene
white not active
white, flashes executing
blue executed (running, is active)
1
Fig. 17: Menu Scenes
3
2
Bekijk gratis de handleiding van Elsner Cala Touch KNX TH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Cala Touch KNX TH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11667 MB |
