Elsner Cala Touch KNX TH handleiding
Handleiding
Je bekijkt pagina 21 van 118
19 Operating the device via the touch display
Room Controller Cala Touch KNX • Version: 13.07.2022 • Technical changes and errors excepted.
Building protection (prolonged absence, e.g. vacation), heating or
cooling active
The small additional symbol shows whether heating or cooling is active (control value
unequal to zero, use depends on the connected system).
As long as Eco mode is active, there is an additional symbol for "comfort exten-
sion". This option may also be blocked in the ETS (symbol does not appear for
selection).
Remain on the comfort extension symbol for a little longer in order to briefly switch
back to comfort operation. This allows the user to maintain the nominal comfort value
for a longer time, e.g. when having guests. The duration of this comfort extension pe-
riod is set in the ETS. The remaining time is shown next to the symbol. After the com-
fort extension period is terminated, the system returns to Eco mode.
(4) The current mode and level in red are displayed in the fan coil icon. "A" means "au-
tomatic", "M" manual ".
By tapping on the fan icon, the level can be changed manually. By repeatedly touching,
the display changes to M0 (manual Off), M1 (manual level 1), M2 (manual level 2), M3
(manual level 3) and back to AX (automatic).
To confirm the selection and activate the displayed mode, stay on the icon for a little
longer. When the button tone is activated, an acoustic feedback occurs. The mode is
now active, the color of the symbol has changed from white to coloured.
(5) The nominal value for the current mode can be adjusted by tapping on the minus
and/or plus symbol.
If the manual modification of the nominal value is blocked in one mode, the sym-
bol "Manual blocked" is briefly shown when an attempt is made to modify the
value.
(6) The dots on the lower display edge symbolise the individual menu pages in the
main menus. The currently selected position is marked in colour. Swipe to the left or
right on the display to show the other menu pages.
4.5. Light
Lights can be switched or dimmed on the maximum of three operating pages "Light".
The manual temperature setting on the device is only possible if "Light" has been acti-
vated in the ETS setting item "Menus". The maximum number of light pages is three.
Menus, page 57 and Light 1-3, page 59
Depending on the type of lamp and the settings made in the ETS, the display page
"Light" shows various elements.
Bekijk gratis de handleiding van Elsner Cala Touch KNX TH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Cala Touch KNX TH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11667 MB |
