Elsner Cala Touch KNX TH handleiding
Handleiding
Je bekijkt pagina 19 van 118
17 Operating the device via the touch display
Room Controller Cala Touch KNX • Version: 13.07.2022 • Technical changes and errors excepted.
On the display page "Sensor system, the current measuring values from the sensor (2)
are displayed underneath the (1) symbols for the measuring variables. Depending on
the model, this can be temperature, air humidity and/or the carbon dioxide level of the
air.
The temperature is displayed in degree Celsius.
The relative air humidity is displayed in %.
The CO
2
content in the air is shown in ppm (parts per million),
with 1000 ppm = 0,1%.
CO
2
levels between 300 ppm and 1000 ppm are referred to as fresh air. From 1000 ppm
to 2000 ppm the air is considered stale.
In all cases, this is the measuring value from the device.
(3) The dots on the lower display edge symbolise the individual menu pages in the
main menus. The currently selected position is marked in colour. Swipe to the left or
right on the display to show the other menu pages.
1
Fig. 10: Menu Sensor system, example Cala KNX AWS/TH
2
3
Fig. 11 a+b: Sensor system menu: Cala KNX TH, Cala KNX T
Bekijk gratis de handleiding van Elsner Cala Touch KNX TH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elsner |
| Model | Cala Touch KNX TH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11667 MB |
