Elsner Cala KNX T 202 Sunblind handleiding

Niet gecategoriseerd

Elsner

42 pagina's

PDF beschikbaar

Handleiding

29 Setting the parameters

Cala KNX T 201/202 Sunblind Push Button • Version: 04.10.2021 • Technical changes and errors excepted

All LEDs individually controllable

This is where you set the brightness of the LEDs, whether objects are used, whether

the LEDs switch off automatically after pushing the button and what the LEDs for tem-

perature display should indicate.

9.7. Buttons

Cala KNX T 201/202 Sunblind has an area control, i.e. if you touch 2 or more but-

tons at the same time, you can activate another function. The value (0 or 1) can be set

for the evaluation of the activation of the surface operation.

Set whether you want to use the screen control.

LED mode All LEDs individually controllable

Brightness 0 ... 100%; 30%

Use objects No • Yes

Object value on/off after reset

(if objects are used)

0 • 1

Function LEDs for temperature display • always OFF

• On after pressing button for settable time

• On for object value = 1 /

Off for object value = 0

Lighting period after pressing (if "On after

pressing button for a settable time")

1 ... 5 seconds ; 3 seconds

Object value after reset (if "On for object

value = 1 / Off for object value = 0)

0 • 1

Use block object (if "On for object value = 1

/ Off for object value = 0)

No • Yes

LEDs for temperature display • display actual value only

• display only target value/base shift

• display actual value and target value/base

shift

Function LED 1 (top left) / 2 (top right) / 3

(bottom left) / 4 (bottom right)

[LED 3 and 4 only for Cala KNX T 202 Sun-

blind]

• always OFF

• On after pressing button for settable time

• On for object value = 1 /

Off for object value = 0

Lighting period after pressing (if "On after

pressing button for a settable time")

1 ... 5 seconds ; 3 seconds

Object value after reset (if "On for object

value = 1 / Off for object value = 0)

0 • 1

Use block object (if "On for object value = 1

/ Off for object value = 0)

No • Yes

Use screen control No • Yes

Use screen control Yes

Activation object assessment • Value 1 = active | Value 0 = inactive

• Value 0 = active | Value 1 = inactive

Bekijk gratis de handleiding van Elsner Cala KNX T 202 Sunblind, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.