Elsner Cala KNX T 202 Sunblind handleiding

Niet gecategoriseerd

Elsner

42 pagina's

PDF beschikbaar

Handleiding

28 Setting the parameters

Cala KNX T 201/202 Sunblind Push Button • Version: 04.10.2021 • Technical changes and errors excepted

If separate variables are used, select whether the variable of the 2nd stage is a 1-bit ob-

ject (on/off) or an 8-bit object (on with percentage value/off).

Now specify what should be sent when the control is blocked.

On release, the control variable follows the rule again.

In case of a common control variable for heating and cooling, 0 is always transmitted

as a fixed value.

9.6. LEDs

Set the LED mode.

All LEDs as ambient lighting

If all LEDs are to be used as ambient lighting, illuminate all simultaneously. Set the

brightness of the LEDs, whether objects are used and whether the LEDs switch off au-

tomatically after pushing the button.

Control variable is on • 1-bit object

• 8-bit object

Value (in %)

(for 8-bit object)

0...100

When blocked, the control variable should • not be sent

• send a specific value

Value (in %)

(only if a value is sent)

0...100

LED mode • All LEDs off

• All LEDs as ambient lighting

• All LEDs individually controllable

LED mode All LEDs as ambient lighting

Brightness 0 ... 100%; 30%

Use objects No • Yes

Object value on/off after reset

(if objects are used)

0 • 1

Use automatic switch-off after pressing a

button

No • Yes

Switch off after (is automatic switch off is

used)

1 ... 255; 30 secs. after pressing

LEDs for temperature display • display actual value only

• display only target value/base shift

• display actual value and target value/base

shift

Bekijk gratis de handleiding van Elsner Cala KNX T 202 Sunblind, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.