Elsner Cala KNX T 202 Sunblind handleiding

Niet gecategoriseerd

Elsner

42 pagina's

PDF beschikbaar

Handleiding

27 Setting the parameters

Cala KNX T 201/202 Sunblind Push Button • Version: 04.10.2021 • Technical changes and errors excepted

reached. You should set the time appropriate to the cooling system at this point (ob-

serve manufacturer's instructions).

Now specify what should be sent when the control is blocked.

On release, the control variable follows the rule again.

In case of a common control variable for heating and cooling, 0 is always transmitted

as a fixed value.

PI control with predetermined application:

This setting provides fixed parameters for a cooling ceiling

Now specify what should be sent when the control is blocked.

On release, the control variable follows the rule again.

2-point-control (only stage 2):

2-point-control is used for systems which are only set to ON or OFF.

Enter the hysteresis that prevents frequent on/off switching of temperatures in the

threshold range.

Maximum control variable is reached

at setpoint/actual difference of (in °C)

1...5

Reset time (in min.) 1...255; 30

When blocked, the control variable should • not be sent

• send a specific value

Value (in %)

(only if a value is sent)

0...100

Control type • PI control

Setting of the controller by • Controller parameter

• specified applications

Application • Cooling ceiling

Maximum control variable is reached

at setpoint/actual difference of (in °C)

Cooling ceiling: 5

Reset time (in min.) Cooling ceiling: 30

When blocked, the control variable should • not be sent

• send a specific value

Value (in %)

(only if a value is sent)

0...100

Control type

is determined at a higher stage for com-

mon variables

• 2-point-control

Hysteresis (in 0.1°C) 0...100; 20

Bekijk gratis de handleiding van Elsner Cala KNX T 202 Sunblind, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.