Elsner Cala KNX T 202 Sunblind handleiding

Niet gecategoriseerd

Elsner

42 pagina's

PDF beschikbaar

Handleiding

30 Setting the parameters

Cala KNX T 201/202 Sunblind Push Button • Version: 04.10.2021 • Technical changes and errors excepted

Activate the required drive. The menus for further adjustment of the drive will then be

displayed.

The Cala KNX T 202 Sunblind has 2 drives that can be activated.

9.7.1. Drive

If the push-button is used to control a drive, select the "blind", "awning", "shutter" or

"window" function and define the push-button function and control mode.

Blind

Standard:

Standard inverted:

Object value after reset 0 • 1

Function • Switch

• Selector switch

• 8 bit value 0 ... 255

• 8 bit value 0 ... 100%

• 16-bit floating point value

• Scenario recall

Value (switch)0 • 1

Value (8 bit value 0 ... 255) 0 • ... • 255

Value (8 bit value 0 ... 100%) 0 • ... • 100

Value in 0.1 (16 bit value floating point) -6707600 • ... • 6707600; 10

Scenario number(Scenario recall)1 • ... • 64

Use drive line No • Yes

Function Shutter

Swap Up/Down No • Yes

Control mode • Standard

• Standard inverted

• Comfort mode

• Dead man switch

Behaviour for button actuation (up): short = Stop/Step | long = Up

Behaviour for button actuation (down): short = Stop/Step | long = Down

Time between tap and hold (0.1 sec) 0 ... 50; 10

Behaviour for button actuation (up): long = Stop/Step | short = Up

Behaviour for button actuation (down): short = Stop/Step | long = Down

Time between tap and hold (0.1 sec) 0 ... 50; 10

Repetition of the step command upon

extended button press

none • every 0.1 s • ... • every 0.5 s • ... •

every 2 s

Bekijk gratis de handleiding van Elsner Cala KNX T 202 Sunblind, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.