Elsner Cala KNX T 202 Sunblind handleiding

Niet gecategoriseerd

Elsner

42 pagina's

PDF beschikbaar

Handleiding

22 Setting the parameters

Cala KNX T 201/202 Sunblind Push Button • Version: 04.10.2021 • Technical changes and errors excepted

If the comfort setpoint is used as the basis, a dead zone is determined for the control

mode "heating and cooling" to avoid direct switching from heating to cooling.

Setpoint for standby

Standby mode is usually used for daytime mode when people are absent.

If setpoint values are entered separately:

A starting setpoint value is defined as well as a temperature range in which the setpoint

value may be changed.

If the comfort setpoint value is used as a basis:

If the comfort setpoint is used as the basis, the increase/decrease of this value is indi-

cated.

Eco setpoint

Eco mode is usually used for night mode.

If setpoint values are entered separately:

A starting setpoint value is defined as well as a temperature range in which the setpoint

value may be changed.

Reduction by up to (in 0.1°C) 1…100; 50

Increase by up to (in 0.1°C) 1…100; 50

Dead zone between heating and cooling

(only if both heating AND cooling are used)

1…100; 50

Heating initial setpoint (in 0.1 °C)

valid until first Communication

-300…800; 180

Cooling initial setpoint (in 0.1 °C)

valid until first Communication

-300…800; 240

Min. object value heating/cooling (in 0.1

°C)

-300…800; 160

Max. object value heating/cooling (in 0.1

°C)

-300…800; 280

Reduce heating setpoint (in 0.1°C)

(for heating)

0…200; 30

Increase cooling setpoint (in 0.1°C)

(for cooling)

0…200; 30

Heating initial setpoint (in 0.1 °C)

valid until first Communication

-300…800; 160

Cooling initial setpoint (in 0.1 °C)

valid until first Communication

-300…800; 280

Min. object value heating/cooling (in 0.1

°C)

-300…800; 160

Bekijk gratis de handleiding van Elsner Cala KNX T 202 Sunblind, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.