Elsner Cala KNX T 202 Sunblind handleiding

Niet gecategoriseerd

Elsner

42 pagina's

PDF beschikbaar

Handleiding

21 Setting the parameters

Cala KNX T 201/202 Sunblind Push Button • Version: 04.10.2021 • Technical changes and errors excepted

The grades for the setpoint changes is predefined. Whether the change remains active

only temporarily (do not store) or remains stored even after restoration of power (and

programming) is determined in the first section of "General controller". This also ap-

plies to a comfort extension.

The controller can be switched from eco mode, i.e. night mode, to comfort mode via

the comfort extension. This means that the comfort setpoint can be maintained for

longer, for example when having guests. The duration of this comfort extension period

is set. After the comfort extension period is terminated, the system returns to eco

mode.

Setpoint Comfort

Comfort mode is usually used for daytime mode when people are present. A starting

value is defined for the comfort setpoint as well as a temperature range in which the

nominal value may be modified.

If setpoint values are entered separately:

If the comfort setpoint value is used as a basis:

If the comfort setpoint is used as the basis, the increase/decrease of this value is indi-

cated.

Analysis of the status object /

Behaviour of the switching object at value

• 0 = Heating | 1 = Cooling

• 1 = Heating | 0 = Cooling

Switching object value

before first Communication

(only if switching object is used)

0 • 1

Grading for setpoint changes

(in 0.1 °C)

1… 50; 10

Storage of setpoint(s) • not be retained

• after power restoration

• after restoration of power and program-

ming

Comfort extension time in seconds

(can only be activated from eco mode)

1…36000; 3600

Initial heating/cooling setpoint (in 0.1 °C)

valid until first Communication

(not upon saving the target value after pro-

gramming)

-300…800; 210

Min. object value heating/cooling (in 0.1 °C) -300…800; 160

Max. object value heating/cooling (in 0.1

°C)

-300…800; 280

Minimum base setpoint (in 0.1°C) -300…800; 160

Maximum base setpoint (in 0.1°C) -300…800; 280

Bekijk gratis de handleiding van Elsner Cala KNX T 202 Sunblind, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.