Elektron Tonverk handleiding
Handleiding
Je bekijkt pagina 64 van 110
15. MIX TRACK PARAMETERS
64
15. MIX TRACK PARAMETERS
The parameters that are available on the Mix track are explained in this chapter. For more information about
Mix track, please see “5.3.5 MIX TRACK (TRACK 16)” on page 20. On the Mix track, you have several
dierent settings related to external audio, track mixing, the main eect, and you also have two LFOs as
dedicated modulation sources for a number of the track’s parameters.
15.1 EDITING THE MIX TRACK PARAMETERS
Press [TRK] + [TRIG 16] to select the Mix track. There are five PARAMETER pages for the Mix track. Press
[TRIG], [SRC], [AMP], [FX], and [MOD] to access the tracks PARAMETER page groups. Use the [UP]/
[DOWN] keys to access the parameter group’s pages. You can also press a [PARAMETER PAGE] key re-
peatedly to cycle through that group’s parameter pages. Press and hold a [PARAMETER PAGE] key to see
the values for all parameters on that page.
The track parameters can be locked to other settings at any step of the pattern by first pressing and hold-
ing the [TRIG] key, then adjusting the parameter settings with the DATA ENTRY knobs. For more informa-
tion, please see “10.10.1 PARAMETER LOCKS” on page 40.
If you press [TRIG 16] to select the Mix track without first pressing and holding [TRK], you
can still use the [KEYBOARD] to play the previously selected audio track.
15.2 TRIG PAGE
Here you set the options for notes that are trigged. This is also where you select trig conditions. Press the
[TRIG PARAMETERS] key to access the menu. Change settings using the DATA ENTRY knobs. These
general settings aect note trigs placed on the sequencer.
NOTE
Trig Note sets the pitch of the note when trigged. When in LIVE RECORDING mode and using the [KEY-
BOARD ] to enter notes, the pitch of the [TRIG] keys played will override this setting. The NOTE parame-
ter is not available for tracks that have the Subtracks SRC machine assigned.
VEL
Trig Velocity sets the velocity of the sequencer’s note trigs.
LEN
Trig Length sets the length of the note trig. In LIVE RECORDING mode, the duration of pressing the
[TRIG] keys overrides this general setting.
PROB
Trig Probability sets the probability that the trigs on the track play or not. The probability outcome is
re-evaluated every time a trig is set to play. The default setting is 100%, meaning that all the trigs on the
track plays every time. This parameter can be parameter locked which lets you give separate trigs their
own probability.
RTRG
Retrig enables multiple trig repeats on placed trigs. Use DATA ENTRY knob A to turn retrig on/o. For
information on setting retrig locks on specific trigs in the sequencer, please see “10.7 RETRIGS” on page
39.
RTIM
Repeat Time sets the retrig rate. 1/16 is the nominal retrig rate, one trig per step. 1/32 corresponds to two
trigs per step and so on. To do triplets, for example, set the retrig rate to 1/12 (or 1/24).
Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elektron |
| Model | Tonverk |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15555 MB |