Elektron Tonverk handleiding
Handleiding
Je bekijkt pagina 27 van 110
7. QUICK START
27
Press [TEMPO] to open the TEMPO menu, where you can adjust the BPM and SWING settings. Use
DATA ENTRY knob A or LEVEL/DATA to change the tempo. Pressing the knob while turning it chang-
es the tempo eight BPM at a time. Use [UP]/[DOWN] or DATA ENTRY knob B to change the tempo in
decimal steps. To tap a tempo setting, hold [FUNC] and tap the [TEMPO] key in a steady rhythm. After
four consecutive taps the average tempo of the taps will be calculated. By continuing to tap, the average
tempo will keep updating. On the main interface screen, you can also press and hold the [ARROW] keys
[LEFT] or [RIGHT] to temporarily nudge the tempo up or down by 10%. Release the key to revert to the
original tempo.
Nudging the tempo is very handy when manually syncing Tonverk to a turntable or an
external sound source. Note that you do not need to be in the TEMPO menu to nudge the
tempo.
Use DATA ENTRY knob D to adjust the SWING setting of the pattern, to employ a propulsive, rhythmic
groove. The swing ratio can be set to 50-80%. The default setting is equal spacing, 50%.
Press [NO] to close the menu.
7.5.2 METRONOME
The metronome settings control the internal metronome of Tonverk. Press [TEMPO] to open the TEMPO
menu. Use the DATA ENTRY knobs E-H to change the settings.
Press [NO] to close the menu.
METRO activates/deactivates the metronome. You can also press [FUNC] + [KEYBOARD F#1] to tog-
gle the metronome on/o even if you are not in the METRONOME menu.
SIG. sets the note and beat measure of the metronome time signature.
PREROLL sets the number of bars the metronome will sound before the sequencer starts playing.
This setting is only relevant when you are in LIVE RECORDING mode.
GAIN sets the volume of the metronome’s click.
7.6 EDITING PARAMETERS
Each track makes use of up to six parameter page groups, each containing a number of pages. Press
[PARAMETER PAGE] keys TRIG, SRC, FLTR, AMP, FX, and MOD to access the dierent PARAMETER page
groups. These parameters aect the sound and signal in various ways.
1. Make sure a pattern is playing.
2. Press [TRK] + [TRIG 1–16] to select a track. Select track 1–8 to get more audible results from the
parameter editing.
3. To change, for example, the cuto of the filter, press the [FLTR] key to open the FILTER page.
The parameter labeled FREQ changes the cuto of the filter. Turn DATA ENTRY knob E to change
the parameter value, and hear how the sound is aected.
Try out the remaining PARAMETER page parameters to explore a range of sound-shaping possibilities.
Bekijk gratis de handleiding van Elektron Tonverk, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Elektron |
| Model | Tonverk |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15555 MB |