Electrolux EW7F510Y handleiding
Handleiding
Je bekijkt pagina 15 van 92
7.5 Temperature
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Touch this button repeatedly until the desired
temperature value appears on the display.
Tapping on the SmartSelect level could
change the selected temperature.
SmartSelect level could automatically
change, according to the temperature
selected.
When the display shows the indicators ,
the appliance does not heat the water.
7.6 Spin
When you set a programme, the appliance
automatically sets the default spin speed.
Touch repeatedly this button to:
• Change the spin speed. The display
shows only the spin speeds available for
the set programme.
• Set theNo Spin option .
Set this option to deactivate all spin
phases. The appliance performs the only
draining phase of the selected washing
programme. Set this option for very
delicate fabrics. The rinses phase uses
more water for some washing
programmes.
• Activate the Rinse and hold
option.
The final spin is not performed. The water
of the last rinse is not drained out to
prevent the fabrics from creasing. The
washing programme ends with water in
the drum.
The display show the indicator . The
door stays locked and the drum turns
regularly to reduce creasing. You must
drain the water to unlock the door.
If you touch the Start / Pause button,
the appliance performs the spinning phase
and drains the water.
The appliance empties the water out
automatically after 18 hours
approximately.
• Activate the Silent option.
The intermediate and the final spinning
phases are suppressed and the
programme ends with water in the drum.
This helps to reduce creasing.
The display shows the indicator . The
door stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the door.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available. In
some programmes the rinses are
performed with more water.
If you touch the Start / Pause button,
the appliance performs the only draining
phase.
The appliance empties the water out
automatically after 18 hours
approximately.
7.7 Finish In
Set this option as last after programme
and other options selection, otherwise it
can be cancelled if you change some
setting.
This option allows choosing the time within
which a programme should terminate.
This button allows activating the
Finish In option and by means of the
Plus (+ increases) and Minus (- decreases)
touch buttons it is possible to choose the time
within which a programme should terminate.
The programme end can be postponed by
one 1 hour every + button touch until 24
hours maximum. The 'finish in' option time
can be removed by pressing- button until 0.
The display shows the normal programme
duration alternatively with the set programme
ENGLISH 15
Bekijk gratis de handleiding van Electrolux EW7F510Y, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electrolux |
| Model | EW7F510Y |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 8581 MB |
