Electro-Voice ZLX-8P-G2 handleiding
Handleiding
Je bekijkt pagina 25 van 88
ZLX-G2 Full-range loudspeaker Amplifier DSP | en 25
Bosch Security Systems, LLC
User manual
2024-03 | 02 |
– GAIN - sets the amount of increase or reduction of the equalization filter.
LOW/HI SHELF - Shapes the sound using a shelving type filter that can be applied to the
low frequency or high frequency response using two controls:
– FREQ - sets the center frequency of the filter. For the LOW SHELF filter the GAIN of
the filter tapers off above the frequency selected. For the HIGH SHELF filter the GAIN
of the filter tapers off below the frequency selected.
– GAIN - sets the amount of increase or reduction of the signal below or above the FREQ
setting.
LOW/HI PASS - Pass band filters that shape the sound by only passing signal above or
below the selected frequency.
– FREQ - sets the corner frequency for the pass band filter. For HI PASS filters all
frequencies above the selection will be passed through. Frequencies below the setting
will be tapered off. For LOW PASS filters all frequencies below the selection will be
passed through. Frequencies above the selection will be tapered off.
FX & FX ENABLE
The FX control is used to select the desired effect (e.g. reverb, chorus, delay, etc.) to apply
to the FX send. The FX send level is independently controlled in the INPUT1 and INPUT2 FX
control. The FXENABLE turns ON or OFF the effect globally. FXENABLE can be toggled
with a footswitch.
AFS (automatic feedback suppression)
The 12-band automatic feedback suppression (AFS) can be engaged to reduce unwanted
feedback frequencies when microphones or instruments with pickups are used. Feedback
occurs when sound from the loudspeaker enters the microphone or pickup and is amplified
by the loudspeaker and played back again. High levels or extended periods of feedback can
damage hearing and equipment.
Available options for this selection are OFF and ON.
Reducing feedback
To reduce feedback:
1. Set the loudspeaker and microphone or instrument according to your performance.
Follow appropriate microphone placement and use practices:
– Do not place the microphone directly in front of the loudspeaker. Refer to the user
manual of your microphone to know the pickup and rejection patterns of your
microphone.
– Avoid placing music stands, tablets, or other large flat objects near the microphone
such that they can cause audio reflections into the microphone.
– Use proper microphone technique when speaking, singing or placing by an
instrument to avoid using excessive input gain. For example, hold the microphone
close to your mouth when performing.
– Engage appropriate input channel PRESET for your application: LOWCUT80Hz,
LOWCUT120Hz, VOCALMIC, VOICEFILTER, SPEECH, ACOUSTICGUITAR, etc.
Refer to INPUT DSP control menu.
– Do not cup the microphone element with your hands while speaking or singing.
Only hold the microphone by the handle or body as per the microphone
manufacturer's recommendation.
2. Enable automatic feedback suppression (AFS) in the DSP control menu or FX section of
the QuickSmart Mobile app. This will enable AFS on INPUT1 and INPUT2.
Bekijk gratis de handleiding van Electro-Voice ZLX-8P-G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Electro-Voice |
| Model | ZLX-8P-G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7278 MB |
